Business Community > WiFi > EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
< WiFi

EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
2023-05-13 21:14:23
Tags: #Firmware Update
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.9

Omada SW Controller (version 5.9.31) ask me to upgrade firmware of two EAP225-Outdoor(EU) v1.0

 

These AP are in version 5.0.9

The new firmware will be 5.1.0

 

Anyone have the same issue ?

  0      
 
  0      
 
#1
Options
5 Reply
Re:EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
2023-05-15 08:39:43

  @candre 

 

Hi, have you tried upgrading them manually on the controller?

Check this: EAP225-Outdoor(EU)_V1_5.1.0 Build 20220926

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
2023-05-17 20:10:59 - last edited 2023-05-17 20:11:23

  @Virgo Yep,

I've tried manual upgrade, same error of automatic update.

 

Here some screenshoot : procedure start, and after some minutes I've got the error

 

 

ERROR :

 

 

 

  0  
  0  
#3
Options
Re:EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
2023-05-18 03:43:15
Just striving to develop myself while helping others.
  0  
  0  
#4
Options
Re:EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
2023-05-23 20:08:01 - last edited 2023-05-23 20:15:55

  @Virgo Unfortunately, this is not my case.

AP and Controller are in the same vlan, so there is no problem of port due of use of the same L2.

 

Also thsi problem is happening only with this specific AP in this specific hardware version (and so this specific firmware).

Other AP (245 and 225v3) are not suffering the same problem.

 

 

Regards

  0  
  0  
#5
Options
Re:EAP225-Outdoor(EU) v1.0 5.0.9 upgrade to 5.1.0 fail
2023-05-24 02:31:55

  @candre 

 

Uhm...maybe you can forget the EAP on the controller, and upgrade them to the 5.1.0 in standalone mode then manage them by controller again.

But note Forget means reset, so it is up to you, but actually the controller will assign the setting files to the EAP again once EAPs are managed by controller.

Just striving to develop myself while helping others.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 759

Replies: 5

Tags

Firmware Update
Related Articles
 EAP225-Outdoor(EU) v1.0 stop working after update to 5.0.9
939 0
 (EAP225-Outdoor(EU) v3.0 ) and EAP225-Outdoor(US) v1.0    
545 0
2 EAP225-Outdoor in MESH?
972 0
 EAP225 Outdoor V1 Firmware upgrade to 5.1.6 failed
671 0
eap225-outdoor
623 0
 RSTP connection to my CCTV was lost when I upgraded EAP225-Outdoor(US) v1.0 to 5.1.6 release
130 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.