Business Community > Routers > VPN not working l2tp, ipsec, openvpn on ER605
< Routers

VPN not working l2tp, ipsec, openvpn on ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN not working l2tp, ipsec, openvpn on ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN not working l2tp, ipsec, openvpn on ER605
VPN not working l2tp, ipsec, openvpn on ER605
2023-05-03 11:51:34 - last edited 2023-05-04 07:04:12

Hello,

 

 

I followed the tplink documentation to create a vpn server.

 

My devices :

  • ER605
  • Switch SG2008P
  • OC200
  • EAP115

 

 

I managed to configure my hardware and adopt it with OMADA. 

I have a consumer ISP box with dynamic ipv4. I created a DynDNS at my provider with a domain name. I configured my router. The DynDNS works.

 

My test with OpenVPN it's connect but i don't have accès to my LAN.

 

I can"t connect from windows 11 to l2TP or IPSEC with PSK and user : 

 

I tested the opening of the ports on my router ISP in UDP 4500 500 1701. I tested similary in OMADA Transmission > NAT.
 

Thank you so much for your help.

 

Have a nice day.

  0      
 
  0      
 
#1
Options
9 Reply
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-05 10:26:19

Hello @Wynal,

 

May I know the WAN IP address of ER605? Is it a public IP?

Have you tested these VPNs on different VPN Clients?

Have you tried turning off the firewall and anti-virus software on the VPN Clients for testing?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-05 15:55:04

 Hello @Hank21,

 

Thank you for your reply.

 

I tried on my laptop with another internet connection and without firewall/antimalware (windows defender). Does not work.

 

My IP of ER605 is 192.168.0.1
The WAN port of ER605 is directly connected to my ISP box.
My ISP box has a dynamic ip, it changes every day. I created a DynDNS with a domain name.

 

Thank you for your help.

Have a nice day.

  0  
  0  
#3
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-08 01:41:01 - last edited 2023-05-08 06:31:38

Hello @Wynal,

 

1. Please go to Device List, and click on the ER605, and you will see a detailed window pops up.

And you may go to Details---WAN, please share a screenshot with us as the below image.

 

2. May I know the firmware version of ER605?

Did you set ER605 as the VPN Server, and the Windows PC as the VPN Client?

Did you set IKEv2 VPN on the Windows PC?

 

3. There are some Configuration FAQs as your reference:

https://www.tp-link.com/support/faq/3050/

 

If it doesn't help, please share some screenshots of your VPN settings.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-08 11:04:41 - last edited 2023-05-08 11:08:34

Hello  @Hank21 

 

Thank you so much for your reply.

 

This is my configuration ER605 :

 

The ipv4 192.168.1.50 is my adress ip on my router ISP.

The firmware: 

2.1.2 Build 20230210 Rel.62992

I've succeeded with OpenVPN but is slooowly (1/2 mb/s in upload & download).

For my L2TP configuration :  Server : (Client to site) 

 

 

In the meantime i will read your documentation link.

Thank you.

Have a nice day. 

 

 

  0  
  0  
#5
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-09 08:32:44 - last edited 2023-05-09 08:34:35

Hello @Wynal,

 

Thanks for your reply.

 

Could you change the DNS to blank or 8.8.8.8/8.8.4.4 for testing?

Please confirm if the Pre-Shared key is correct, and you may refer to this article to do some troubleshooting.

Did you set the same subnet for VPN IP pool as the DHCP IP pool?

If so, you may change to another subnet for testing.

 

And you may go to Insight-VPN Status to check if the tunnel is established.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-09 14:20:32 - last edited 2023-05-09 14:24:04

 Hello @Hank21 

 

Thank you for your reply.

 

I tried with dns 8.8.8.8 and 8.8.4.4 and blank. Doesn't work.

I've read the FAQ. All services is running and i've modify regedit with key : AssumeUDPEncapsulationContextOnSendRule  and ProhibitIpSec.

After restart laptop, my vpn login doesn't work...

This is my ER605 vpn configuration :

 

  1. I've tried with LAN and a new subnet with it's own DHCP range.
  2. My PSK wich I used on my laptop to login
  3. Server dns blank and 8.8.8.8 / 8.8.4.4

 

 

This is my vpn configuration on windows 11 : 

  1. domain name (DynDNS) work with OpenVPN
  2. My PSK L2TP VPN on my ER605  / VPN / L2TP
  3. My user created on my ER605 / VPN / USERS
     

On my NAT configuration ROUTER ISP :

 

  0  
  0  
#7
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-10 01:41:43 - last edited 2023-05-10 01:43:22

Hi  @Wynal，

 

Thanks for such detailed information!

 

Please confirm if you have enabled IPsec PassThrough in ALG on the ISP Router.

And confirm if the Server IP you typed in is the ISP Router's WAN IP address.

 

Please go to Insight—VPN status—VPN tunnel, and share a screenshot of this page with us.

 

If it doesn't help, could you create a test VPN and share the username, password, pre-shared key, and Server IP via the Message on the community?

And then we can try to connect to it locally for testing.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#8
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-16 08:08:19

Hi @Wynal,

 

You may also try to download and install the update KB5010795 manually by following the links.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options
Re:VPN not working l2tp, ipsec, openvpn on ER605
2023-05-20 11:10:44

Hi  @Hank21,

 

Thank you so much i go to try this.

Ive read a news on a IT blog the same problem with KB update. Microsoft will work for apply patch.

 

Have Nice Day.

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2028

Replies: 9

Related Articles
 Ipsec VPN / OpenVPN on ER605
591 0
ER605 L2TP Client to Lan not working
571 0
VPN IPSEC IKEv2 on er605 v2
2493 0
ER605 help me please to setup a more secure L2TP/IPSEC tunnel
893 0
 ER605 L2TP\IPSEC server (in DMZ)
504 0
 ER605 L2TP/IPSec time issue
423 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.