Home

Forums

Stories

Knowledge Base

Business Community > Routers > Multi LAN connection

< Routers

Multi LAN connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Multi LAN connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nert

2023-05-03 02:40:10 - last edited 2023-05-04 07:04:38

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-05-03

Multi LAN connection

2023-05-03 02:40:10 - last edited 2023-05-04 07:04:38

Need assistance on configuring ER605 to connect the two networks, Have tried LAN and VLAN with various static routing setup with no success. Scoured Internet for solutions and no luck. Please recommend ER605 V2 connections and static routing entries. Thanks so much in advance!

4 Reply

Virgo

LV5

2023-05-05 09:37:17

Posts: 2588

Helpful: 353

Solutions: 191

Stories: 0

Registered: 2021-05-10

Re:Multi LAN connection

2023-05-05 09:37:17

@Nert

Hi, you can take a look:

If the 68LAN need to access the 20 server, you need to through the double NAT, you can set the port forwarding rule on the ASUS router for ER605 V1 WAN IP, set the port forwarding on green ER605 for ER605 V2 WAN IP, and set the port forwarding on the blue ER605 for 192.168.20.65.

Just striving to develop myself while helping others.

Nert

LV1

2023-05-08 00:38:08

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-05-03

Re:Multi LAN connection

2023-05-08 00:38:08

@Virgo

Thanks. Unfortunately, I'm unable to connect the WAN port on 20s (Blue) network due to physical restrictions. I was hoping to use the LAN ports for the GREEN connections to the BLUE network and possible communicate through VLANs and static routing. If you think there's any other ideas such as VPN, I'm open to that.

Thanks again.

Virgo

LV5

2023-05-08 07:15:27 - last edited 2023-05-08 07:22:47

Posts: 2588

Helpful: 353

Solutions: 191

Stories: 0

Registered: 2021-05-10

Re:Multi LAN connection

2023-05-08 07:15:27 - last edited 2023-05-08 07:22:47

@Nert

Nope, the ER605 is a NAT device and you can not disable the NAT on it.

Or you can try to create a site-site IPsec VPN between the ASUS router and blue ER605, and keep green ER605 connected to the ASUS router but disconnect to blue ER605.

Just a thought.

Just striving to develop myself while helping others.

KJK

LV4

2023-05-08 14:23:57

Posts: 317

Helpful: 118

Solutions: 31

Stories: 0

Registered: 2022-03-29

Re:Multi LAN connection

2023-05-08 14:23:57

@Nert

I’m not sure what you need that ER605v1 for. You should be able to connect the RT-AC66U and ER605v2 directly.

Anyways, you can try the following configuration.

ER605v1

LAN68:

192.168.68.44/24

vlan68

Port ?, Untagged in vlan68, PVID=68

LAN20:

192.168.20.44/24

vlan20

Port ?, Untagged in vlan20, PVID=20

RT-AC66U

Static route:

192.168.20.0 255.255.255.0 192.168.68.44 LAN

ER605v2

Is 192.168.20.10 in LAN or LAN20? Let’s say it is in LAN.

LAN:

192.168.20.10/24

vlan1:

Port ?, Untagged in vlan1, PVID=1

Static route:

192.168.68.0 255.255.255.0 192.168.20.44 LAN

I assume you use the 255.255.255.0 subnet mask.

Kris K

Multi LAN connection

Multi LAN connection

Information

Voters 0

Tags