CPE 510 in Client mode connects and disconnects to CPE 510 in AP mode repeatedly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE 510 in Client mode connects and disconnects to CPE 510 in AP mode repeatedly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE 510 in Client mode connects and disconnects to CPE 510 in AP mode repeatedly
CPE 510 in Client mode connects and disconnects to CPE 510 in AP mode repeatedly
2023-03-04 16:53:37
Tags: #Pharos Control #CPE510
Model: CPE510  
Hardware Version: V3
Firmware Version:

Network topology:

 

ISP--->Router (192.168.0.1) <----->CPE POE<--->CPE 510 v3.0 AP mode (latest firmware) static ip: 192.168.0.254 <----- 150 ft clear LOS ------> CPE 510 v3.2 Client Mode (latest firmware) static ip: 192.168.0.253<-------> CPE POE<--->Workstation LAN port (dynamic IP)

 

I have previously connected to the AP mode CPE510 with other wireless devices and access the internet. I can see the AP's SSID in the Client CPE510's Pharos control and have it locked to AP, password entered, both CPE510s set to 20/40 Mhz channel, MAXstream not enabled. The Client will connect to the AP for 4-5 seconds at a time, drop the connection, and repeat, over and over. I think I am just needing to adjust IP settings but I am at a loss for how to proceed.

 

Any help is much appreciated.

  0      
  0      
#1
Options
1 Reply
Re:CPE 510 in Client mode connects and disconnects to CPE 510 in AP mode repeatedly
2023-03-06 06:19:07

Hi @1sam1224 

 

You can try differnet channels on the main AP mode CPE510;

 

Also make sure you have maximum Transmit Power on both side's wireless settings;

 

Upgrade the CPE firmware to the newest one;

 

More details, please refer to this article

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options