PPSK without Radius not sending DHCP to clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.PPSK without Radius not sending DHCP to clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have setup a new WLAN (OSA_Residents) for my residents (apartments) - this was created as PPSK without radius. I then created a PPSK profile and added 2 'users' to the profile both on their own VLANS. The WLAN is not on a custom VLAN and is set as WPA2-PSK / AES. I can only enable the 2.4 and 5GHz band as their is a bug and if you enabled the 6Ghz band PPSK disappears - but that isn't the problem at hand but I would love for that to get fixed.
Once this basic setup was complete I went and created 2 VLANS to test - Apartment1 VLAN ID 101 and Apartment2 VLAN ID 102. I then assigned the PPSK profiles to each of those VLANS to match. After that I made sure that both ports on the omada switch are set to "all" so they should accept traffic for either vlan. I dot NOT have a management VLAN if that matters.
Once this is all done I then took my new samsung s23 and joined the SSID: OSA_Residents. I chose the password from one of the profiles and it tries to connect but fails. What I see in the omada cloud is that the device connected but could not get an IP. My VPN/Router is the ER605 v2.0 and the POE switch is the TL-SG2210MP v3.0. I do not have L2 relay enabled as the VLANs themselves have a proper subnet and scope.
What could I be missing here? From all my reading and watching of videos I'm doing it right. Is it the 6Ghz network bug? My phone is Wifi6 capable and all the EAPs I have are Wifi6 capable as well...
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @OrangeStreet
The PPSK doesn't support 6GHz at present so that the PPSK option is not there when the 6GHz is checked. Actually neither of your EAP650 and EAP610-Outdoor support 6GHz band, checking the box of 6GHz on a SSID won't take actual effect, only 2.4GH and 5GHz are valid.
Please confirm whether your new samsung s23 would obtain valid IP address from DHCP properly when it's connected to the SSID with other security types like WPA-Personal or None security?
- Copy Link
- Report Inappropriate Content
Hi @Fae My phone connects just fine with the other networks not using PPSK. I went ahead and disabled the checkboxes for 6Ghz on those networks anyway as to your point, they do nothing in my case. p.s. Let's hope that 6e comes available in Omada soon
- Copy Link
- Report Inappropriate Content
Hello @OrangeStreet
OrangeStreet wrote
Hi @Fae My phone connects just fine with the other networks not using PPSK.
Thank you for your confirmation. Regarding the issue that your new samsung s23 connected to the PPSK secured SSID won't get an IP address, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230300870, please check your email box and ensure the support email is well received. Thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1885
Replies: 13
Voters 0
No one has voted for it yet.