Implemented Disable NAT on the routers (i.e. TL-ER605 and TP-Link TL-ER7206)
Team,
Suggestion (assuming this is not possible within the current firmware):
Allow customers to operate the router without using NAT.
Meaning allow the device to behave as a special router with firewall capabilities that can be turned on and off as needed.
This prevents double-natting when behind an ISP router.
While maintaining the ACL-capbilities for enhanced network security.
What is your view here?
Cheers - Will
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@ITV, completely agree with the need to be able to turn off NAT. I have a public subnet that I don't want translated.
TP-Link: this is a much needed ability.
Lee
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Has this been evaluated or categorized any further?
I understand the perspective/view of it possibly not being high demand, but on the flip side if it wasn't: why is there such support for it in the open source community?
I know I personally don't have any TP-Link/Omada routers (nor have I recommended or installed any) due to the lack of this feature. But I know if it were an option I would be re-evaluting things.
Clive_A wrote
Hi @MaxxFR
MaxxFR wrote
It's been sent and notified to the dev team. But I don't think it's gonna be a high-priority demand/request.
I know open source can do that because there is openwrt for ER605 already and I had a brief look at the features on it. It does support many features that we don't support, but that's the advantage of open source. There are always unconventional ways to use products and the different needs from people, but our baseline is still providing conventional products to meet the most basic uses of our 2B customers.
I have looked up what UBNT does, and I don't find it supports disabling NAT as well. And so far we plan to keep it as a router. And most other contract users don't have the requirement of disabling the NAT. Just a few people on the forum expect this, I am afraid that this feature will be delayed longer than any other requests. Or not considered. I am still checking with the dev about this.
If you have a double-NAT issue, turn the modem to bridge mode. Or set its NAT mode to full-cone mode. If your modem cannot be changed to bridge mode to fix double-NAT, you may also write a request to the manufacturer of the modem or seek help from the ISP to see if they can provide a firmware or command to turn the modem to bridge mode.
- Copy Link
- Report Inappropriate Content
Hi @W38122077
Thanks for posting in our business forum.
W38122077 wrote
Has this been evaluated or categorized any further?
I understand the perspective/view of it possibly not being high demand, but on the flip side if it wasn't: why is there such support for it in the open source community?
I know I personally don't have any TP-Link/Omada routers (nor have I recommended or installed any) due to the lack of this feature. But I know if it were an option I would be re-evaluting things.
Clive_A wrote
Hi @MaxxFR
MaxxFR wrote
It's been sent and notified to the dev team. But I don't think it's gonna be a high-priority demand/request.
I know open source can do that because there is openwrt for ER605 already and I had a brief look at the features on it. It does support many features that we don't support, but that's the advantage of open source. There are always unconventional ways to use products and the different needs from people, but our baseline is still providing conventional products to meet the most basic uses of our 2B customers.
I have looked up what UBNT does, and I don't find it supports disabling NAT as well. And so far we plan to keep it as a router. And most other contract users don't have the requirement of disabling the NAT. Just a few people on the forum expect this, I am afraid that this feature will be delayed longer than any other requests. Or not considered. I am still checking with the dev about this.
If you have a double-NAT issue, turn the modem to bridge mode. Or set its NAT mode to full-cone mode. If your modem cannot be changed to bridge mode to fix double-NAT, you may also write a request to the manufacturer of the modem or seek help from the ISP to see if they can provide a firmware or command to turn the modem to bridge mode.
It still stays as the current tag since the last time I reported it to the request pool. If this affects your choice, you can consider other brands now.
It is said this was considered but not in high-priority order. I asked before but never got an accurate answer. So, the timeline for this feature is unknown. Many other new features or optimizations are more important than this. So in their opinion, there is a tier list yet this one is placed behind or may not be considered.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 40
Views: 10469
Replies: 66