Business Community > Routers > IP address/groups (ranges) assigned to router ports
< Routers

IP address/groups (ranges) assigned to router ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IP address/groups (ranges) assigned to router ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IP address/groups (ranges) assigned to router ports
IP address/groups (ranges) assigned to router ports
2023-02-18 19:20:04 - last edited 2023-02-19 05:20:48
Tags: #WAN Setup
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

I'm using the router in a standalone configuration. what i want to do is assign IP Range1 (192.168.1.2-20) to port5, Range2 (192.168.1.21-40) to port4, Range3 (192.168.1.41-200) to port3. i have found where i can create VLAN and assign that VLAN to a spicific port, but i cannot seem to create multiple VLANs within the same /24 range. i've also found IP Groups/Addresses under preferecnce, but i cannot find how to bind these addresses/groups to the ports, or even a VLAN, or vice-verse. is this functionality not possible, am i missing some piece of knowledge on networking/configuration, or is some other piece of hardware needed?

There are 10 types of people in this world, the ones who understand binary and the ones who don't.
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:IP address/groups (ranges) assigned to router ports-Solution
2023-02-19 05:20:31 - last edited 2023-02-19 05:20:48

I realized i was being foolish and needed to change the subnet to /26 instead of the normal /24. the issue now is that the router is not allowing me to add my second, third, or fourth network ranges.

 

my first network has the following:

IP Address : 192.168.10.1
Subnet Mask : 255.255.255.192
Vlan : 1921
Starting IP Address : 192.168.10.11
Ending IP Address : 192.168.10.60
 
for the second network, i had to skip 64 and go with 65:
IP Address : 192.168.10.65
Subnet Mask : 255.255.255.192
Vlan : 1922
Starting IP Address : 192.168.10.66
Ending IP Address : 192.168.10.126

 

I hope this helps someone.

There are 10 types of people in this world, the ones who understand binary and the ones who don't.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:IP address/groups (ranges) assigned to router ports-Solution
2023-02-19 05:20:31 - last edited 2023-02-19 05:20:48

I realized i was being foolish and needed to change the subnet to /26 instead of the normal /24. the issue now is that the router is not allowing me to add my second, third, or fourth network ranges.

 

my first network has the following:

IP Address : 192.168.10.1
Subnet Mask : 255.255.255.192
Vlan : 1921
Starting IP Address : 192.168.10.11
Ending IP Address : 192.168.10.60
 
for the second network, i had to skip 64 and go with 65:
IP Address : 192.168.10.65
Subnet Mask : 255.255.255.192
Vlan : 1922
Starting IP Address : 192.168.10.66
Ending IP Address : 192.168.10.126

 

I hope this helps someone.

There are 10 types of people in this world, the ones who understand binary and the ones who don't.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 467

Replies: 1

Tags

WAN Setup
Related Articles
 IP Address Ranges in IP Groups in Omada
4876 0
Fixed IP Addresses not Being Assigned
479 0
Devices not being assigned their fixed IP address
1902 0
 No IP Address Assigned
786 0
Multiple MACs Assigned to the Same Switch Port
222 0
 Multiple IP addresses assigned to WAN port
1358 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.