Business Community > Routers > Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
< Routers

Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-02-16 17:17:26 - last edited 2023-02-16 17:27:47
Tags: #Firmware Update
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

I upgraded to 2.1.2 Build 20230210 Rel.62992 on my standalone ER605 V2 yesterday. My wife's phone, a Motorola One 5G Ace started requesting IP address every few seconds. It will request an IP around 16 times, stop, then a few minutes later it starts again. I noticed it yesterday, and reset her WiFi network settings, which seemed to stop it, but then it started again this morning. 

 

DHCP Server allocated IP address 192.168.0.100 for the client[MAC: Xx:XX:Xx:xX:xX:xX].

 

She is near the access point, and has an excellent signal. So, she is not dropping WiFi.

 

This was not happening with 2.1.1.

 

Thanks!

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-02-17 03:11:57

Dear @Hemicrusher,

 

The issue you reported sounds unusual. To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230228271, please check your email box and ensure the support email is well received. Thanks!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-02-17 17:11:04

  @Fae

 

Got the email and replied describing the issue and what I have done to try and fix it.

 

I ended up setting a static IP on the phone, so it's not constantly asking for an IP.

 

Thank you!

  0  
  0  
#3
Options
Re:Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-02-18 14:49:34 - last edited 2023-02-18 15:02:11

This morning I looked at the log, and a TP-Link HS105 Smart Plug is now asking for an IP multiple times in a row. Two groups of five requests, each request about a minute apart. I am in a crowded 2.4ghz area, and it's around -50db where the plug is located.

 

Edit: Looking up this issue specific to the TP-Link HS105 Smart Plug, it seems to be a common issue.....repeatedly asking for an IP and then settling down.

 

  0  
  0  
#4
Options
Re:Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-06-29 20:12:42 - last edited 2023-06-29 20:35:09

  @Hemicrusher @Fae 

 

I have the same issue. "DHCP Server allocated IP address..." for some devices in my network every 2 minutes (one device is actually another TP-Link Archer router).

 

Running on latest firmware.

 

Is there any way to solve it?

 

PS. Actually this device is using static IP address, yet ER605 keeps assigning it address from DHCP every 2 minutes or so.

  0  
  0  
#5
Options
Re:Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-12-12 10:12:09

Same problem here, but with multiple devices, has there been any acknowledgement regarding this ?

 

I am getting 10k logs full due to this

 

Running newest stable firmware v2.2.2 on my completely new ER605 V2

 

  0  
  0  
#6
Options
Re:Single device keeps requesting IP on ER605 V2 since upgrade to 2.1.2
2023-12-13 01:23:43

Hi @pdu_

pdu_ wrote

Same problem here, but with multiple devices, has there been any acknowledgement regarding this ?

 

I am getting 10k logs full due to this

 

Running newest stable firmware v2.2.2 on my completely new ER605 V2

 

 

This is not an issue or bug. No need to panic and hope you can take a second to read and understand the controller's new features and its system.

If you take a look at the log settings, you will understand. Turn off the DHCP log. Simple that is.

The Help Center(question mark on the UI) or the User Guide explains things in a pretty clear way.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 926

Replies: 6

Tags

Firmware Update
Related Articles
Error de actualizacion ER605 V2
623 0
Unable to create entry for single IP in Preferences -> IP Group -> IP Address on ER605
658 0
ER605 V2 GUI Background "Confidential"?
627 0
Surprise firmware update to ER605 V2
2834 0
Scheduled reboot for ER605 v2
757 0
 Er605 keeps disconnecting
553 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.