Home

Forums

Stories

Knowledge Base

Business Community > Routers > Router issues

< Routers

Router issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Router issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Router issues

an0nymous

2023-02-04 22:16:55

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-12-24

Router issues

2023-02-04 22:16:55

Tags: #WAN Setup

Model: ER7206 (TL-ER7206)

Hardware Version:

Firmware Version:

So

I've got this

https://www.amazon.co.uk/gp/product/B08SWR1K56/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

First of all, when I configure it manually to NOT have the same IP of the modem, it decides to auto configure it as that regardless. The modem has an IP of 192.168.0.1, and then this gets that exact same address which is weird

Secondly, the SFP on the WAN doesn't appear to work. I swapped the SFP to a known working one (I've got an Omada switch too), and I still ahd the exact same issue. The SFP WAN is "enabled"

I'm therefore at a loss as to why it's behaving this way?

4 Reply

KimcheeGUN

LV4

2023-02-05 20:17:06

Posts: 607

Helpful: 284

Solutions: 42

Stories: 0

Registered: 2022-07-05

Re:Router issues

2023-02-05 20:17:06

@an0nymous

are these devices on the controller?

Also is the router updated to the newest firmware?

I can not teach anyone anything - I can only make them think - Socrates

Hank21

2023-02-06 13:41:36

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:Router issues

2023-02-06 13:41:36

Dear @an0nymous

an0nymous wrote

First of all, when I configure it manually to NOT have the same IP of the modem, it decides to auto configure it as that regardless. The modem has an IP of 192.168.0.1, and then this gets that exact same address which is weird

ER7206 does not have "auto condifure" function. By default, it always be 192.168.0.1;

an0nymous wrote

Secondly, the SFP on the WAN doesn't appear to work. I swapped the SFP to a known working one (I've got an Omada switch too), and I still ahd the exact same issue. The SFP WAN is "enabled"

May I know the SFP module you are using? The SFP will be connected to your Modem? On the modem's side, what SFP module you are using?

Please note the router SFP WAN cannot be connected to ISP fiber directly.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

an0nymous

LV1

2023-02-07 00:44:57 - last edited 2023-02-07 00:45:22

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-12-24

Re:Router issues

2023-02-07 00:44:57 - last edited 2023-02-07 00:45:22

@Hank21

The SFP connects to a regular RJ45 on my ISP's side of things.

This is the one I have

10Gb SFP+ RJ45 Copper Module - 10GBase-T SFP+ Transceiver Compatible for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Netgear, Mikrotik S+RJ10, TP-Link, D-Link : Amazon.co.uk: Computers & Accessories

The ISP is just a regular consumer ISP too

Hank21

2023-02-07 03:46:22

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:Router issues

2023-02-07 03:46:22

Dear @an0nymous

an0nymous wrote

This is the one I have

10Gb SFP+ RJ45 Copper Module - 10GBase-T SFP+ Transceiver Compatible for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Netgear, Mikrotik S+RJ10, TP-Link, D-Link : Amazon.co.uk: Computers & Accessories

Could you please try a 1G SFP module? For example TL-SM331-T

ER7206 cannot work with 10G SFP module

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Router issues

Router issues

Information

Voters 0

Tags