@AstronomyGuy 

The Map is for simulating the signal strength of Omada EAPs.  Have you APs in your setup?    None of the Routers or Switches appear in the map, its now totally WiFi signal only

  @AstronomyGuy 

Thanks. I did have one AP in the current configuration. Right now i am just in the testing and initial configuration. once deployed at the site it will have 5 to start off. So it must need 2 or more to get the list populated.  Thanks again.

  @AstronomyGuy After you have added a Map (use a image file to show your floor plan with known lengths, and use the scale tool on upload to scale the map), use the Edit button to the upper right of the map.  In Edit mode, you can add real and virtual APs to the map, and you can add wall representations for the simulation to effect signal strength.  When you enter Edit mode, there should be a flyout menu from the left of the map, with drag and drop APs and walls.

  @JoeSea Thanks! That did what I wanted. The virtual devices really help plan out placement for the outdoor devices.