Business Community > WiFi > EAP670 cannot use untagged network LAN
< WiFi

EAP670 cannot use untagged network LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP670 cannot use untagged network LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP670 cannot use untagged network LAN
EAP670 cannot use untagged network LAN
2023-01-04 09:36:14 - last edited 2023-01-04 10:18:15
Model: EAP670  
Hardware Version: V1
Firmware Version: 1.0.2

I recently purchased a EAP670 to replace some of my EAP110s. I have three wireless networks with the following VLANs: 20, 30, 50. VLAN 20 is a guest network. I can place my EAP110 on any VLAN and it works. However, when using the 50 VLAN on the EAP670, that is the untagged network LAN, I can connect to the AP but receive no IP.

 

Any ideas why? change the VLAN to 30 works fine. Guest on VLAN 20 works as expected.

  0      
 
  0      
 
#1
Options
4 Reply
Re:EAP670 cannot use untagged network LAN
2023-01-06 03:17:51

  @Damasu For my 610v2 and 650, it has consistently been that I have to set the VLAN to Off for the WLAN that is associated with the native network wired to the AP.  My assumption has been that the native network is not tagged in Omada, and so there are no tagged packets for the AP to associate with the SSID.

 

Perhaps my system is screwy?

 

I also have a feature request in for Omada to have a port native network be tagged, since this is an option in standalone mode on TPLink switches.

  0  
  0  
#2
Options
Re:EAP670 cannot use untagged network LAN
2023-01-06 08:50:21

  @Damasu 

 

I have EAP225-outdoor and one of the SSIDs can work well with untag VLAN.

 

But my switch/router are both Omada and all of them are managed by the controller.

 

 

  0  
  0  
#3
Options
Re:EAP670 cannot use untagged network LAN
2023-01-06 16:19:35
@Damasu - are your switches also managed by Omada?
Hybrid OPNsense/Omada EAP Cat6 backhaul 4 x EAP670 1 x EAP610-Outdoor Omada Controller v5.15.6.4 Win 11x64 Router: OPNsense Intel N5105 quad-core I226V 2.5Gbe w/16GB RAM Dual WAN Fios/Spectrum 1Gbps
  0  
  0  
#4
Options
Re:EAP670 cannot use untagged network LAN
2023-01-06 18:31:47 - last edited 2023-01-06 18:57:28

  @Shoresy entire environment is omada. EAP110 can use the untagged network LAN EAP670 refuses to play nicely. I havent tried to use without VLAN but that seems to defeat the purpose.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 659

Replies: 4

Related Articles
EAP670 and EAP653 EU
1975 0
Difference between EAP670 and EAP673?
2982 0
EAP670 Speeds Below Expectations
1704 0
 Cannot get 160 channel to work on EAP670
746 0
HP8600 cannot connect to TP-Link EAP670
249 0
Asus GT-AX11000 and EAP670
407 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.