First and foremost, you'll need to use 1.1.1.3 and 1.0.0.3 as the DNS servers, as those are set up in Cloudflare to block malware/adult content. 1.1.1.1 will not block anything. Secondly, DNS is served out over DHCP via your ROUTER, not your EAP. You'll either need to configure your kids' wireless devices manually, or make some config changes on your router to ensure all of your LAN devices receive 1.1.1.3 and 1.0.0.3 as the DNS servers.
Your EAP is not a router, and does not serve out IP's or DNS information. You can go about configuring your kids' devices in one of three ways:
1. Go on their wifi devices, set up their IP's statically, and assign 1.1.1.3/1.0.0.3 statically as their DNS servers
2. Set up VLAN's (more involved and complicated), and have your router serve those DNS IP's over that VLAN config
3. Serve out 1.1.1.3 and 1.0.0.3 as the DNS server for ALL of your LAN via your ROUTER - another simple option that cannot be changed by anyone but the router admin
Again, your ROUTER must serve out the IP's and DNS servers, not your EAP, so the config either has to be done at the router, or done by manually setting your kids' devices up with static DNS servers. Setting their devices manually would be the easiest option, but if they have admin privileges to their devices, they can easily change the DNS servers, so keep that in mind.
Last but not least, you can set up a Pi-hole DNS server on your LAN, and use your own DNS server that you can configure and control to block unwanted content. This is more involved, but if you're technically savvy, it's fun to do, not terribly expensive, and highly effective. How you proceed is up to you, but if your kids are older and technically savvy, they can bypass DNS content blocking.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
