Solution EAP650/EAP655-Wall | EAP650 | EAP670 | EAP653 May Drop Some IPv6 Packets. [Updated on Aug 4th 2023]
Update as of Aug 4th 2023:
Update the new firmware for EAP655-Wall v1, EAP650 v1 and EAP670 v1, which has fixed the IPv6 issues described in this thread. Please find the new firmware release note and download link in the following post.
EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
Welcome to provide your feedback in the above post, including letting us know about successful device upgrades!
This Article Applies to
EAP650 v1/ v1.20/ v1.26
EAP670 v1/ v1.20/ v1.26
EAP653 v1/ v1.6
EAP655-Wall v1/v1.6
EAP690E HD v1/v1.6
Issue Description/Phenomenon
Recently we received feedback that EAP655-Wall | EAP650 | EAP670 | EAP653 may drop some IPv6 traffic, the issue may manifest as follows:
-
Wireless clients failed to obtain IPv6 addresses via DHCPv6.
Related Post: EAP650 dropping IPv6 traffic
-
SSID with the VLAN enabled may fail to pass some IPv6 traffic.
Available Solutions
Here are the available Beta firmware to resolve the issues.
If you are looking for a quick solution, you may upgrade the following Beta firmware to fix the issue temporarily.
Beta Firmware Download:
EAP650(EU&US)_v1_1.0.0_Build 20221116 (Beta)
EAP653(EU&US)_v1_1.0.0_Build 20221125 (Beta)
EAP670(EU&US)_v1_1.0.0_Build 20221219 (Beta)
Beta Release Notes:
1. Fixed the TCP Connection Failure issue mentioned in the solution post 577390.
2. Fixed the IPv6 related issue described in this thread based on the current official firmware Build 20220921.
3. The above firmware is applied to EAP650(EU&US) | EAP670(EU&US) v1/v1.20/v1.26.
4. Please be sure you have read the Beta Test Agreement before proceeding!
Update as of Apr 10th 2023:
Add the Beta firmware for EAP655-Wall, which has fixed the IPv6 related issue described in this thread.
EAP655-Wall(EU&US)_v1_1.0.3_Build 20230329 (Beta)
Beta Release Notes:
1. Fixed the casting or streaming issue mentioned in the solution post 604118.
2. Fixed the IPv6 related issue described in this thread based on the first firmware 1.0.0 Build 20220719.
3. The above firmware is applied to EAP655-Wall(EU&US) v1/v1.60.
4. Please be sure you have read the Beta Test Agreement before proceeding!
Update as of Apr 12th 2023:
Add the Beta firmware for EAP650-Wall, which has fixed the IPv6 related issue described in this thread.
EAP650-Wall(EU&US)_v1_1.0.3_Build 20230410 (Beta)
Beta Release Notes:
1. Fixed the IPv6 related issue described in this thread based on firmware EAP650-Wall_V1_1.0.1 Build 20220627.
2. The above firmware is applied to EAP650-Wall(EU&US) v1.
3. Please be sure you have read the Beta Test Agreement before proceeding!
Update as of Apr 18th 2023:
Update the Beta firmware for EAP653 V1, which has fully fixed the IPv6 related issue described in this thread.
EAP653(EU&US)_v1_1.1.0_Build 20230414 (Beta)
Beta Release Notes:
1. The above firmware is applied to EAP653(EU&US) v1/v1.60.
2. Please be sure you have read the Beta Test Agreement before proceeding!
Update as of May 19th 2023:
Add the Beta firmware for EAP690E HD v1, which has fixed the IPv6 related issue described in this thread.
EAP690EHD(EU&US) v1_1.0.3_Build 20230517 (Beta)
Beta Release Notes:
1. Fixed the IPv6 related issue described in this thread based on the 1.0.3 firmware.
2. The above firmware is applied to EAP690E HD(EU&US) v1.
3. Please be sure you have read the Beta Test Agreement before proceeding!
Update as of Aug 4th 2023
Update the new firmware for EAP655-Wall v1, EAP650 v1 and EAP670 v1, which has fixed the IPv6 issues described in this thread. Please find the new firmware release note and download link in the following post.
EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
Welcome to provide your feedback in the above post, including letting us know about successful device upgrades!
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
https://community.tp-link.com/en/business/forum/topic/595086 is probably related
- Copy Link
- Report Inappropriate Content
@Fae Hello, I was just posting to say that I have been running firmware EAP653(EU&US)_v1_1.1.0_Build 20230414 (Beta) on my EAP653 for over 30 days now with no issued noticed, with regards to stability via IPv6 or indeed IPv4 connections. Hopefully an official release will come soon. Thanks for looking into this and providing an updated firmware, I had ordered the TP Link AP for my home LAN and had wondered what was happening with my v6 clients.
- Copy Link
- Report Inappropriate Content
@Fae I have two EAP670s running stable firmware 1.0.6 and just today I learned about this issue. Interesting that the same notebook where I experimented fails to get address from DHCPv6 in Windows 11 whatever I tried, while rebooted into Linux Ubuntu 22.04 it gets an IPv6 address after 3-5 minutes from boot. Is there any update for EAP670 or is 20221219 build still the most recent with the fix? I am worried about trying Beta firmware because stability is more important for me than IPv6 support. Is there any way I could be notified when stable firmware with IPv6 fix comes out for EAP670?
- Copy Link
- Report Inappropriate Content
@Fae I'm having the same issue with a pair of EAP670s I installed in my home and it is extremely infuriating. Both are on firmware 1.0.6 and it takes my devices up to 10 minutes after connecting to receive IPv6 addresses via SLAAC. I don't have anything omada except for access points, I have 3 SSIDs on different VLANs that are all IPv6-enabled and this delay to acquire IPv6 addresses happens on all SSIDs. I am going to return my access points and switch to another vendor if this isn't fixed ASAP.
- Copy Link
- Report Inappropriate Content
Hi @starcraft66,
Please follow the post below for the new EAP670 firmware, which has added the IPv6 fix mentioned in this post.
EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
Welcome to provide your feedback in the above post, including letting us know about successful device upgrades!
- Copy Link
- Report Inappropriate Content
Update as of Aug 4th 2023:
Update the new firmware for EAP655-Wall v1, EAP650 v1 and EAP670 v1, which has fixed the IPv6 issues described in this thread. Please find the new firmware release note and download link in the following post.
EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
Please read this original post for more about the IPv6 related issue.
- Copy Link
- Report Inappropriate Content
Thank you @Fae ! I have installed the 1.0.11 beta firmware on both my EAP670s and IPv6 addresses are acquired instantly now.
- Copy Link
- Report Inappropriate Content
Hello @starcraft66,
Thank you for your valuable feedback. Hope you enjoy the Internet with TP-Link Omada products!
- Copy Link
- Report Inappropriate Content
@Fae Any updates for EAP690E HD?
Quite an expensive unit and no smart home devices or Apple Airprint functionality is working becuase of that.
And looks like that fix been in Beta for quite a while now.
Any plans to put it into the main release?
- Copy Link
- Report Inappropriate Content
Hello, I notice that there was new official firmware released for the EAP653 device, located here https://www.tp-link.com/us/support/download/eap653/v1/#Firmware . Does this official release fix this IPv6 issue? I am running the beta firmware that was posted in this thread earlier this year, but that beta is version 1.1.0 Build 20230414 . The new official firmware is 1.0.9 Build 20230814 (so the new official firmware is a lower build number but a more recent build date?). Let me know, thanks.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 11935
Replies: 42
Voters 3
