Implemented ER7212PC can't assign profiles to switch ports.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have decided to modernize my network with an ER7212PC, 2 additional switches and 2 APs. I already know Unifi, so due to the similarity I thought it shouldn't be a big problem, but already fail at simply assigning a VLAN to the switch port of the ER7212PC.
I already updated the firmware to ER7212PC(UN)_V1_1.0.1 Build 20221106 and did a factory reset.
The switches are still at the post office, so I can currently only test with the ER7212PC.
Under "Devices" I can't find a "Ports" tab on the ER7212PC to assign defined profiles to the individual ports.
So I thought that the profile is set automatically when defining the network via the check mark at the respective interface. I selected the correct ports in the new network "Test"..
..and tried to deselect the ports in the default "LAN" network, but got an error.
Maybe someone can put me on the right track to solve this problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for your valuable feedback. I'm sorry for any misunderstanding or confusion that may have arisen from the product feature description on our website. From my view, the ER7212PC is a Router, as clearly stated in the product category. The mention of a "PoE switch" might be intended to convey that it supports Power over Ethernet and offers more additional LAN ports for expanding your network. To avoid further misunderstanding or confusion, I've forwarded your feedback to the relevant department for unified modification and correction.
- Copy Link
- Report Inappropriate Content
Hi @Fae,
Very happy to hear that you will pass along the message that people are getting confused by the changing capabilities of the products. One might even fear that some could feel cheated by false advertising.
But enough of that. Thank you for sharing about the Gateway ACL, only I do not have the LAN->LAN direction. Can you advice on what I might be missing?
Thank you!
/3660
- Copy Link
- Report Inappropriate Content
I just realized that the current ER7212PC doesn't support Gateway ACL in LAN->LAN direction until the next firmware upgrade. You may need to wait for a new firmware upgrade. I'll actively update the following post to notify the latest firmware release for Omada Routers, welcome to subscribe!
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Report Inappropriate Content
@Fae Thats what I thought at first also, but I do not have the option Lan-> Lan at the gateway ACL.
Also I do not have the option to choose type network at the right pulldown.
So how should I do this?
regards Maikel
- Copy Link
- Report Inappropriate Content
Hi @Fae,
Do you know when the next version update will be released? Could we ask you to push?
I understand that you have had this feature for the past month :)
/3660
- Copy Link
- Report Inappropriate Content
Hello @3660,
The following Beta firmware has been released for trial, which has added LAN-LAN direction in Gateway ACL. Hope it helps.
ER7212PC V1_1.0.4_Build 20230724 Beta Firmware For Trial (Released on July 25th, 2023)
- Copy Link
- Report Inappropriate Content
Recently I updated the ER7212PC to version : 1.1.0 Build 20230803 Rel.83667 with controller version 5.8.31 and I am happy to inform you that the Gateway ACL is now containing LAN-LAN option.
I tried this ACL and it seems to be doing the job.
So Finally this router looks ready for deployement.
Thanks for you help.
Regards Maikel
- Copy Link
- Report Inappropriate Content
Hello @Maikel-K,
Thank you for your valued feedback!
Hope you enjoy the Internet with TP-Link products and have a great day!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 17
Views: 12580
Replies: 48
Voters 17
