EAP235-Wall: Dynamic VLAN - Wrong assingment to VLAN 1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP235-Wall: Dynamic VLAN - Wrong assingment to VLAN 1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP235-Wall: Dynamic VLAN - Wrong assingment to VLAN 1
EAP235-Wall: Dynamic VLAN - Wrong assingment to VLAN 1
2022-11-23 19:47:02
Model: EAP235-Wall  
Hardware Version: V1
Firmware Version: 3.1.0

Hi Everyone!

 

I run 35 EAP235 wall APs and about 15 other models from TP-Link. All devices are managed via Omada.
I run a Windows 2022 server with NPS and dynamic VLAN assignment on WIFI. I have looked at the log files several times, the NPS assigns the devices to the correct VLAN.
However, based on the IP addresses assigned, I can see that most devices on the EAP235 are hardly assigned to the correct VLAN but end up in VLAN 1 .

The assignment works fine on the other APs.

 

Other users seem to have the same problem: https://community.tp-link.com/en/business/forum/topic/582140

 

 

 

 

 

  0      
  0      
#1
Options
2 Reply
Re:EAP235-Wall: Dynamic VLAN - Wrong assingment to VLAN 1
2022-11-25 07:58:32

  @MikeSchnagli 

 

Is your problem that the EAP downlinked wired client has a VLAN error?

If so it could be a similar problem to the one mentioned in this thread:

https://community.tp-link.com/en/business/forum/topic/525350

 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:EAP235-Wall: Dynamic VLAN - Wrong assingment to VLAN 1
2022-11-25 09:13:07

  @Virgo 

 

no, I only have wired clients in VLAN 1.
Currently I'm testing the beta firmware in this post and it seems far better now.

  2  
  2  
#3
Options