Adding Firewall to TP-Link Omada Setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Adding Firewall to TP-Link Omada Setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

hawkeye556

2022-11-23 13:01:32 - last edited 2022-11-24 01:11:33

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-11-23

Adding Firewall to TP-Link Omada Setup

2022-11-23 13:01:32 - last edited 2022-11-24 01:11:33

Real Newbie question.

Currently have the following Configuration Fios ONT > Wan Port ER605 >SC200 Controller > ER605 Lan Port connected to SG2210MP Switch

Connected Sophos Firewall in Bridge Mode WAN to LAN ER605 / LAN to SG2210MP LAN

When I remove the cable from the ER605 > Switch, the controller shows the ER605 as Disconnected. Does this need to stay or am i missing a rule in the Firewall to allow the connection?

1 Reply

Virgo

LV5

2022-11-24 11:02:10

Posts: 2588

Helpful: 347

Solutions: 191

Stories: 0

Registered: 2021-05-10

Re:Adding Firewall to TP-Link Omada Setup

2022-11-24 11:02:10

@hawkeye556

Suggest tp confirm the physical connection and check if you are connecting the OC200 to the switch?
If you unplug the switch from the ER605, the switch will not get the IP and the controller will not be able to communicate with the gateway, so it will show Disconnected.

Just striving to develop myself while helping others.

Adding Firewall to TP-Link Omada Setup

Adding Firewall to TP-Link Omada Setup

Information

Voters 0

Tags