AI WLAN Optimization disables my 5 GHz networks

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AI WLAN Optimization disables my 5 GHz networks

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AI WLAN Optimization disables my 5 GHz networks
AI WLAN Optimization disables my 5 GHz networks
2022-09-29 19:06:55
Tags: #Optimization
Model: OC200  
Hardware Version: V5
Firmware Version: 1.19.1 Build 20220803 Rel.39727

Hi all,
I have tried to play with the "new" AI WLAN Optimization feature of Omada.

 

My network is fairly simple: 1 x OC200 controller (version 5.5.7 fw version 1.19.1) and 2 x EAP225 APs (fw version 5.0.9). I have 2 SSIDs, one available on 2.4 and 5 GHz, the other has captive portal enabled and is only available on 5 GHz 

 

Every time I run the AI Optimization the result is always the same: the 5 GHz networks on both my APs gets disabled. I have verified with a Wi-Fi scanning tool.

 

To re-enable 5 GHz I have to change any setting in the wireless network profile of the WLAN that is only 5 GHz and save it.

 

I tried with and without "full-sector DFS" and the result is the same.

 

Any idea ?

  0      
  0      
#1
Options
2 Reply
Re:AI WLAN Optimization disables my 5 GHz networks
2023-03-05 09:59:00

  @mtest001 

mtest001 wrote

Hi all,
I have tried to play with the "new" AI WLAN Optimization feature of Omada.

 

My network is fairly simple: 1 x OC200 controller (version 5.5.7 fw version 1.19.1) and 2 x EAP225 APs (fw version 5.0.9). I have 2 SSIDs, one available on 2.4 and 5 GHz, the other has captive portal enabled and is only available on 5 GHz 

 

Every time I run the AI Optimization the result is always the same: the 5 GHz networks on both my APs gets disabled. I have verified with a Wi-Fi scanning tool.

 

To re-enable 5 GHz I have to change any setting in the wireless network profile of the WLAN that is only 5 GHz and save it.

 

I tried with and without "full-sector DFS" and the result is the same.

 

Any idea ?

Same problem with version 5.9.9 previsous was OK running 2 eap245

  0  
  0  
#2
Options
Re:AI WLAN Optimization disables my 5 GHz networks
2023-03-05 10:01:50

Ernesto034 wrote

  @mtest001 

mtest001 wrote

Hi all,
I have tried to play with the "new" AI WLAN Optimization feature of Omada.

 

My network is fairly simple: 1 x OC200 controller (version 5.5.7 fw version 1.19.1) and 2 x EAP225 APs (fw version 5.0.9). I have 2 SSIDs, one available on 2.4 and 5 GHz, the other has captive portal enabled and is only available on 5 GHz 

 

Every time I run the AI Optimization the result is always the same: the 5 GHz networks on both my APs gets disabled. I have verified with a Wi-Fi scanning tool.

 

To re-enable 5 GHz I have to change any setting in the wireless network profile of the WLAN that is only 5 GHz and save it.

 

I tried with and without "full-sector DFS" and the result is the same.

 

Any idea ?

Same problem with version 5.9.9 previsous was OK running 2 eap245

Running Debian 11 also  @Ernesto034 

  0  
  0  
#3
Options