er7206 openvpn standalone
Good morning,
i updated the firmware and today i need to configure openvpn (without controller).
Many devices no longer implement l2tp.
i have configured openvpn but i have a problem.
when connecting I see only the Lan subnet 192.168.20.xxx and all the other subnets are not reachable. i can't send all traffic on the vpn.
I have made several attempts but cannot find a solution.
I insert image of my network.
Thanks in advance for your reply
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
there is only support for one LAN in stand alone, connect the router to a controller and you can select several VLANs
- Copy Link
- Report Inappropriate Content
Thanks for the quick response.
The controller seems like a good solution.
I have only one question: is it possible to have all traffic on the vpn (full vpn)?
When i use l2tp it works perfectly
- Copy Link
- Report Inappropriate Content
No, OpenVPN on Omada use splitt tunnnel and route only trafic to your LAN and VLAN, everything els bypass VPN.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I think they are working on improving OpenVPN, I am using open vpn on a rapspbery Pi4 for now, it is also much much faster than TP-Link's routers. so it's a cheap and easy option, you can also use any old PC and install ubuntu and OpenVPN on it so there are possibilities :-)
- Copy Link
- Report Inappropriate Content
Good idea. I saw the product you use, very interesting. Thanks for all
- Copy Link
- Report Inappropriate Content
Most rasperypi have no fan, so very silent.
I have cabinet with fan but no nois from this anyway.
I use OKdo Raspberry Pi 4 4GB Model B Starter Kit and this work grate,
you can run Omada controller and OpenVPN on same hardware and off cause mutch more if you want to.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2226
Replies: 8