I have some devices on my network that cannot connect to the SSID of the EAP245.

 

Examples:

1) I have two brand new (setup phase) laptop from Dell, with an intel AX201, same driver version, same properties on all settings.

 - One can connect to the EAP245, the other cannot

 - The one that cannot, I can connect it to another SSID from an ASUS router.

 

2) I have a Realtek RTL8811AU dongle that I cannot connect to the EAP245 SSID

 - Tried it on 2 PC

 - The same Dongle can connect to my other ASUS router fine.

 

What I tried.

1) Removed some SSID (unused) from the EAP245

2) Upgrade the firmware

3) Multiple reboots

4) Changed the 2.4G channel to 6 (unused around my house)

5) Added a Syslog server to try to catch more logs, but that does not work!

6) The only thing I see that may be related in the logs on the EAP is this:

 WPA2 authentication times out/failed

 - But I don't see this message on every try

6) I see in the list of clients connected to the EAP245 the MAC of the RTL8811AU, on 5G, but it's with a 169.254.228.169 address.  So it's connected by cannot get a DHCP?

7) Tried other protocols (simpler) 802.11a only, b only, does not fix the connection issue.

 

I've exhausted what I can think of.

Any clues, tips, or things to try would be appreciated.

 

This is highly frustrating.

 

So it seems to be a combination of devices and AP.  But the fact the 2 identical network card/same config/same driver do not have the same behavior is beyond comprehension!

 

Thanks !