Community Fibre at ER605/TL-R605
Hi
Has anyone managed to get the ER605 to work with Community Fibre IPv6? Whatever I try, I cannot get it pull at DHCP address.
Cheers
Gabe
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can directly set IPv6 to bridge mode on the router, and then see if the PC can get the IPV6 address and access the Internet when it is connected.
Or if you have a modem in your network, you can connect your PC to the modem directly to see if you can access the Internet.
What is the connect type that your ISP provided, PPPOE?
- Copy Link
- Report Inappropriate Content
@gabrielhopkins if you enable Ipv6 be sure to check for open ports. It looks like the 605 is just routing traffic and has no firewall for Ipv6.
Please see the following feature request.
https://community.tp-link.com/en/business/forum/topic/274222
- Copy Link
- Report Inappropriate Content
Thank you for the warning. Unfortunately I didn't get that far. TP-Link worked with me for a while to find a solution but we never found a way to get the ER605 to pick up an IPV6 address, etc. It worked immediately with both Linksys and Fritzbox devices and with a Mac/PC plugged into the modem.
I had heard the device doesn't provide an IPv6 firewall, which seems odd for any class of device, but particularly one aimed at "prosumers".
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1001
Replies: 3
Voters 0
No one has voted for it yet.