Site to Site to Site

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Site to Site to Site

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Site to Site to Site
Site to Site to Site
2022-05-26 00:52:15 - last edited 2022-05-30 06:26:32
Model: OC200  
Hardware Version: V1
Firmware Version: 1.15.2 Build 20220323 Rel.60717

Hi, i am having a problem regarding a multiple site to site connection.

 

I initially created a site-to-site from A to C and it goes smoothly, and i want to include site B. but i am getting an error The local subnet and remote subnet cannot overlap with those of existing Ipsec VPN policies.

 

Am i missing something ? 

 

Hope this info would help

 

Site A: 192.168.0.0/24

Site B: 192.168.1.0/24

Site C: 192.168.2.0/24

 

All Site are using ER7206 as router and with each static IP Address.

The controller is on Site A.

 

Thanks for the help.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Site to Site to Site-Solution
2022-05-27 09:11:08 - last edited 2022-05-30 06:26:32

  @Jeesoon1 

 

If you are wanting three sites to build a triangular VPN topology, you'll have two, two build site-to-site IPsec VPN on it.
In the case of using controller is recommended to set manually, do not use Auto Ipsec, note that the LAN IP addresses of the three places are different, and the corresponding IP fill in the right on it.

 

Hope this can help you:
https://www.tp-link.com/support/faq/3051/
https://www.tp-link.com/support/faq/3363/

 

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Site to Site to Site-Solution
2022-05-27 09:11:08 - last edited 2022-05-30 06:26:32

  @Jeesoon1 

 

If you are wanting three sites to build a triangular VPN topology, you'll have two, two build site-to-site IPsec VPN on it.
In the case of using controller is recommended to set manually, do not use Auto Ipsec, note that the LAN IP addresses of the three places are different, and the corresponding IP fill in the right on it.

 

Hope this can help you:
https://www.tp-link.com/support/faq/3051/
https://www.tp-link.com/support/faq/3363/

 

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
Re:Site to Site to Site
2022-05-30 02:33:11

  @Virgo 

 

yes im trying to build this using auto mode. i just thought that the auto mode can do everything. 

  0  
  0  
#3
Options