Sviluppo_ict wrote

Hello,

I have this hardware:

1 Router ArcherC7 ( IPv4 - static ip and gateway 192.168.1.254; LAN - ip 192.168.2.1 - DHCP on pool adress ip .50 to 250 predef gateway 192.168.2.1 - WiFi switch Off becauseI utilize EAPs WiFi  )

1 Omada device AC200 connect ad router (IP static 192.169.2.9 gateway 192.168.2.1)

8 EAPs  (2 EAP255 - 6 EAP115 whit static ip and gateway 192.168.2.1)

4 WifI network

 

My problem is that when i connect my Samsung smart TV on WiFi network generated by EAPs is not working. It to connect correctly at the network but is not connected at internet and iI dont see the Netflix service.

If I switch on the WiFi by ArcherC7 and I connect the TV ad this network all run and I see all service on tv Netfilx.

 

Can you Help Me please.

 

Thanks

  @Sviluppo_ict As far as I am aware, the Archer C7 does not have facility for VLAN's.  From the info looks like your Archer has a LAN with the range 192.168.1.0/24 with gateway of 192.168.1.254.

You seem to have set up a second subnet ... 192.168.2.0/24 with a gateway IP of 192.168.2.1 with the OC200 & 8 x EAP's all with static IP's and as such will be able to communicate with each other BUT not communicate to the outside world (internet)

Since DHCP server is a function of the router, your setup has no possible communication routes.

Best idea would be to set all of your kit (OC200 & EAP's) to operate on the prime LAN .. 192.168.1.0/24 .... if you want to keep the hardware on fixed IP, then say OC200 on 192.168.1.253 & your EAP's 192.169.1.2 through 192.168.1.10.

The gateway for all would be 192.168.1.254

Before the router I have a load balancer that couples two internet connections (one via radio and one via cable). All device connected at WiFi EAPs surf very good on internet. If I connect one mobile at WiFi I can see all movie by Netflix. So all device connected at EAPs will be able to communicate to the outside world (internet).
 Suggestions?