Backward Compatibility
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I am planning to install the TL-SX3008F and knowing this switch is 10Gb and the other end of the fiber there should be a mix of everything.
Is this compatible with the following SFP Module by TP-Link?
-TL-SM331T
-TL-SM5310-T
-TL-SM5110-LR
-TXM431-LR
-TL-SM311LS
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Jeesoon1 wrote
@Hank21 the other end are mixed of 10Gb and 1Gb switch, am i correct to use the console to set the specific port to use 1Gb instead of 10Gb to make it work ? and is there a guide / tutorial on how to do this? there is no regular lan port on TL-SX3008F.
Thanks!
Dear @Jeesoon1
Yes, if the other end is 1Gb port, you will need to use Console to change the TL-SF3008F port to 1G also.
If you don't know how to access the switch with Console cable, please refer to this instruction and CLI guide.
- Copy Link
- Report Inappropriate Content
Jeesoon1 wrote
Hi,
I am planning to install the TL-SX3008F and knowing this switch is 10Gb and the other end of the fiber there should be a mix of everything.
Is this compatible with the following SFP Module by TP-Link?
-TL-SM331T
-TL-SM5310-T
-TL-SM5110-LR
-TXM431-LR
-TL-SM311LS
Thanks!
Dear @Jeesoon1
Yes, tplink 10G SFP models are all compatible with TL-SX3008F.
Please note you need to use tplink SFP models on both ends.
If anotehr end is not tplink, please double check if it is a 10G SFP model and the port speed is 10G fixed.
- Copy Link
- Report Inappropriate Content
@Hank21 the other end are mixed of 10Gb and 1Gb switch, am i correct to use the console to set the specific port to use 1Gb instead of 10Gb to make it work ? and is there a guide / tutorial on how to do this? there is no regular lan port on TL-SX3008F.
Thanks!
- Copy Link
- Report Inappropriate Content
Jeesoon1 wrote
@Hank21 the other end are mixed of 10Gb and 1Gb switch, am i correct to use the console to set the specific port to use 1Gb instead of 10Gb to make it work ? and is there a guide / tutorial on how to do this? there is no regular lan port on TL-SX3008F.
Thanks!
Dear @Jeesoon1
Yes, if the other end is 1Gb port, you will need to use Console to change the TL-SF3008F port to 1G also.
If you don't know how to access the switch with Console cable, please refer to this instruction and CLI guide.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1109
Replies: 4
Voters 0
No one has voted for it yet.