@Andrew71 

news for me???? help me. please

  @Andrew71 

Omada Controller software requires two things to work:

1. It must be able to communicate with the AP. You may try ping the EAP IP from controller PC;

2. Software uses port 29810-29814, make sure these ports are available and useable on this PC.

  @Andrew71 

hi mister, thanks for your help but i have still problems attached I put the screen of my omada software controller as follows: router with ip gateway 192.168.1.1 pc where omada is installed: 192.168.1.243 open doors: 29810,29811,29812,29813, 8043, and 8088. the controller points to 192.168.1.243:8043 everything works correctly even from the mobile app. now i changed pc and i installed omada again, with the following parameters: router with ip gateway 192.168.1.1 pc where omada is installed: 192.168.1.238 open doors: 29810,29811,29812,29813, 8343, and 8188. the controller points to 192.168.1.238:8343 my problem is: i did backup and restore, and also migrate site, but eap and sites have been imported, but i see disconnected devices. how can i solve my problem? I look forward to the solution. thanks always. please

  @Andrew71 

hi all the forum? ther is news for me???? hlep me please

  @Andrew71 I think people can't understand you.

Is your PC able to ping EAPs? Please attach ouput from ping to each EAP.

Andrew71 wrote

  @Andrew71 

 

hi all the forum? ther is news for me???? hlep me please

  @Andrew71 

Hi,

can you try these steps:

1) update omada software to the latest version

2) update the EAPs to the lastest firmware version

Then:

3) from the omada pc ping the EAPs

4) check if the necessary ports are reachable

Let us know how it worked out.

Marcus

  @Andrew71 

hi, i have tried but not resolve.

i my problem is export backup from old controller and import restore into new controller. the pc is different

  @Andrew71 

I don't see output from ping commands to each EAP from new Omada controller PC.

  @Andrew71 

hi mister...

thanks for your availability

i have changed all

i reset all device and i insert a new controller software.

but i have also problem

i have reset eap 235 wall

into schedule System-Controller settings i have insert the url of my controller but not adopt. i have used also omada discovery and the result is succeded, but howewer not adopt.

my settings is:

my public ip:8343 my url controller and i connect of remote.

my public ip:29810 insert into eap and into omada discovery with username and password

the port 29810 is open on tcp/udp into ip address my pc of is controller open (port forwarding on router)

i have also access from smartphone to controller, but the problem is not adopting the device.

how i ping commands to each EAP from new Omada controller PC?

why is not adopt?

  @Andrew71 

hi all the forum

i have a question...

i have installed Oc200 Omada Sdn Controller

if i used IP:port for access to controller, the software omada i can delete?

the controller i ping also remote access

one problem:

which port i open for adopt device to remote?