NVR: Connected with no internet access
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The whole VIGI surveillance already worked when I was at home testing it, but when I transferred it to work, it just won't connect to the internet.
I already tried restarting, resetting to factory default, resetting via hardware (opening up the NVR), restarting the modem/router, going back and forth from auto and manual in the settings.
All cables are connected to where they're supposed to be. Please see photos below for more info (the Switch is connected to LAN 2 on the Modem):
Hello and welcome.
Have you tried differente Ethernet cables? So, when you move the setup from home to work, do you still run the same cables?
What about the settings? Does the NVR use a static IP? What are the settings of this? Do you get an IP address?
So, if you get the IPs, are you able to ping the IP address of NVR from your local PC in the same network? It seems to be an issue with your Internet instead of the NVR.
That would be helpful if you can do the above steps. Let me know about your network topology and settings if you have set up anything advanced.
