I CAN'T ACCESS THE 192.168.0.254 AFTER RESET
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi Good day, Someone please help me on how to access the 192.168.0.254? I already follow some instructions on YouTube like changing the IP address 192.168.0.10 but still, I can't access the homepage of my CPE210. Please Help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello. I see that you set up the static IP to your PC. Well, at the same time, do you have your PC and CPE wire together when doing this?
Have you referred to the guide from the support page on your mode?
If possible, you can reset and set up with the help of the video.
- Copy Link
- Report Inappropriate Content
@Hank21
Hi Good day Sir, Thank you for your reply. I already tried those steps and still have a problem. Please check the image for the error I've received. 
- Copy Link
- Report Inappropriate Content
Dear @CBTerror，
CBTerror wrote
@Hank21
Hi Good day Sir, Thank you for your reply. I already tried those steps and still have a problem. Please check the image for the error I've received.
May I know the firmware version of your CPE?
You can upgrade the CPE's firmware to the latest one to test.
How to Upgrade the Firmware of Pharos Series Product?
Best Regards!
- Copy Link
- Report Inappropriate Content
@Hank21
The firmware version of the CPE210 is 2.2.0 and i tried to upgrade it using the pharos server control application but even though it took a lot of time like 2-3 hours, the firmware version is still not upgrading.
on other hand, I have extra CPE210 and it work properly and can access 192.168.0.254 page smoothly. is the extra CPE210 is already broken or something? Thank you
- Copy Link
- Report Inappropriate Content
Dear @CBTerror ,
CBTerror wrote
The firmware version of the CPE210 is 2.2.0 and i tried to upgrade it using the pharos server control application but even though it took a lot of time like 2-3 hours, the firmware version is still not upgrading.
on other hand, I have extra CPE210 and it work properly and can access 192.168.0.254 page smoothly. is the extra CPE210 is already broken or something? Thank you
Have you tried to reset the CPE?
How to reset: Press the reset hole on the POE adapter of this CPE for about 8 second until you can see lights on the CPE flashing. Please note that, after reset, all settings will become default.
After that, please try to upgrade the firmware version to the latest one one more time.
You may try to close the firewall and anti-virus software and login the default IP 192.168.0.254 again to test.
Changing different devices to login is another suggestion.
Best Regards!
- Copy Link
- Report Inappropriate Content
@Hank2
That's my problem, I can reset the device but I can't upgrade my firmware cause I can't access the 192.168.0.254 homepage. I tried to upgrade it using pharos server control but its not working.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 8800
Replies: 7
Voters 0
No one has voted for it yet.