@adinis what do you mean with not getting any connection.. the Ethernet link led lights are off ? or dhcp client fails to get a lease?

  @adinis but the ports do light right? if do.. are the ports disabled somewhere in the configuration or going through the wrong lan peraphs?

  @crrodriguez not sure if this helps 

  @adinis It might be obvious.. but did you check .. the cable you are using? and by checking I mean using a tester ? 

  @crrodriguez just check the cable by bypassing the ap and connecting it straight to the ethernet port on my wall and the device, tv, connects no problem, but if i go back and try connecting via the ap ethernet, it doesn't connect. Is there a setting i am missing? 

  @crrodriguez ok it seems that its working now, i guess by disconnecting the ap from the wall ethernet port and it restarted itself it seems to have fixed whatever was wrong. I tried 2 different ports on the ap and its connecting now, the only thing is that there is no led status lights but not worried about that as long as its connecting 

  @crrodriguez also just took a look at the ethernet ports and this ap doesn't have any ethernet port led status lights