unable to login to omada hardware device ER605, i am able to login via controller
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am not able to login to router, i need to change the WAN interface speed and duplex.
i am able to login to Omada controller. How to login to device and change the speed and duplex?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey
When controlled by a controller the speed on the WAN port is set to auto-detect
If it is connecting at 100mbps then check the port on the connected device is set to / capable of 1000mbps. This is likely an issue on the Modem / Router you have attached to the ER605
Also ensure the cable is cat5e or newer to ensure a 1gb connection
- Copy Link
- Report Inappropriate Content
Hey
When controlled by a controller the speed on the WAN port is set to auto-detect
If it is connecting at 100mbps then check the port on the connected device is set to / capable of 1000mbps. This is likely an issue on the Modem / Router you have attached to the ER605
Also ensure the cable is cat5e or newer to ensure a 1gb connection
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 778
Replies: 2
Voters 0
No one has voted for it yet.