Dear @Rob23ik,

Rob23ik wrote

Forum:

i can only choose Models i dont have, maybe someone has to update the Model list.

Welcome to the TP-Link Business Community!

May I know which model number you tried to use?

From my try, Omada Controller and EAP265 HD are existed in the list once inputting "Omada" or "EAP265".

As this topic is mainly related to the Omada Controller, I've changed the Model number for you immediately.

  @Rob23ik Hi there,

1. Tplink provide a Utility to help controller adopt devices in different subnet:

https://www.tp-link.com/en/support/faq/2713/

2. No there is no reboot option. The controller provide Force Provision, which means the EAP will be disconnected and readopt.

ALso there is Forget device option. Once the controller forget the EAP it will also reset the EAP

3. 192.168.0.254 is fallback IP of the EAP. If you see this IP, means the EAP does not obtaion IP successfuly from your router.(DHCP did not work) It may have problem on communication with your Router. 

The solution is:

1. Connect EAP to your router directly, it may solve the connection issue;

2. Connect your computer to the EAP via Ethernet cable(so no Router/switch anymore), and set up static IP on your computer like 192.168.0.100, subnet maksk 255.255.255.0. Then run the controller and adopt it. It's suggested to give EAP a static IP to the same subnet as your router.