TP-LINK 2.4GHz 300Mbps / CPE210 - Speeds Slow Over Hours/Days until depowering Client CPE
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK 2.4GHz 300Mbps / CPE210 - Speeds Slow Over Hours/Days until depowering Client CPE
Hi,
My setup:
- Medialink AC1200 Router (MLWR-AC1200R) ----->
- TP-Link 2.4GHz N300 Long Range Outdoor CPE (CPE210) ----->
- (About 50 feet of clear, outdoor space) ----->
- TP-Link 2.4GHz N300 Long Range Outdoor CPE (CPE210) ----->
- Medialink AC1200 Router (MLWR-AC1200R)
This had worked great for over a year, but in the past month the following takes place on the client side:
- A speed test shows 60Mbps+
- A few hours/days go by and the speed drops to <1Mbps
Troubleshooting. From what I can tell....:
- Running an Ethernet cable directly from the CPE power adapter to a computer (and thus skipping the router) does not improve the speed.
- Powering the router off/on does not help.
- Unplugging/plugging the ethernet cable between the router and CPE210 does not help
- Unplugging/plugging the ethernet between the CPE and the CPE power supply does not help
- Running a cable from the router to a computer does not increase speeds
- Unplugging/plugging the power supply for the CPE brings the speeds back to 60Mbps+ for the next few hours/days
Again, no recent changes from a hardware/end user behavior/settings perspective. Any thoughts?
Thanks