Ok so I am having a few problems with my setup that desperatley need some help with. I have a ER605 gigbit router (v1) with omada OC200 cloud controler, 1 EAP66600, and 2 EAP245. I have ensured all items are updated to the latest firmware.

My ISP uses Arris modem, it is bridged for our static IP, and the Wan port 1 of my router is confiured properly to work with my assigned static IP. The router in the controller is in a perpetual loop - Heartbeat missed - adopting - provinsioning - connected (This loop happens every few minutes). when this loop happens only wireless clients loose internet acesss, my hardwired connections are solid. So the router does not seem to reboot, and the time online for the device in the controler is correct to the other devices.

Now for the strange part. While trying to chase down this issue and decipher whether it is an issue with the router or my ISP modem, I had an old D-link router that was used previously to me upgradeing the network. I configured Wan2 of the ER605 for DHCP failover, connected a line from the 605 to the dlink, and the dlink's wan port configured to static ip and connected to the ISP modem. The perpetual loop still contiunes, but now it is roughly every 7-10 minutes, but not loss of internet for any clients wireless or wired.

The other oddity logged in locally to the controller it does not show the gateway stats, but login via the cloud gateway is dispalyed along with stats.

Anyone able to provide some help.