Solution EAP660HD v1 1.1.0 - SSID Broadcast feature doesn't take effect [Case Closed]
This Article Applies to:
EAP660HD(EU&US)_V1_1.1.0_Build 20211027
EAP620HD(EU&US)_V2_1.0.2_Build 20211025
Issue Description/Phenomenon:
Recently we received feedback on the EAP660HD v1 on firmware 1.1.0 that disabling "SSID Broadcast" feature doesn't take effect. After unchecking "SSID Broadcast", some wireless devices still can find the SSID in the available WLAN list.
In Controller mode:
In Standalone mode:
Available Solutions:
This issue has been located, and it will be fixed in the subsequent firmware upgrade of EAP660 HD V1.
If you are looking for a quick solution, you may install the Beta firmware below to fix the issue.
EAP660 HD (EU&US)_v1_1.1.0_Build 20211223 (Beta)
EAP620 HD (EU&US)_v2_1.0.3_Build 20220216 (Beta)
Note: Please be sure you have read the Beta Test Agreement before proceeding!
Edit: the issue has been fixed in the following official firmware, please check for an update.
EAP610(EU)_V1_1.0.4 Build 20220325
EAP610(US)_V1_1.0.4 Build 20220325
EAP620 HD(EU)_V2_1.0.3 Build 20220325
EAP620 HD(US)_V2_1.0.3 Build 20220325
EAP660HD(EU)_V1_1.1.1 Build 20220118
EAP660HD(US)_V1_1.1.1 Build 20220118
Thank you for your attention!
Feedback:
If this was helpful, click the thumbs-up (Kudos) button below.
If there is anything unclear in this solution post, please feel free to comment below.
Thank you in advance for your valued feedback!
TP-Link Community Team