Solution Apache Log4j Vulnerability in Omada Controller - Updated on May 18, 2022 [Case Closed]
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi All,
TP-Link is aware of the vulnerability in Apache Log4j used in Omada Controller (CVE-2021-44228: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints).
Affected Products/Services:
Omada Cloud Services
Omada Controller (Windows)
Omada Controller (Linux)
Omada Controller OC200
Omada Controller OC300
Omada Discovery Utility
Kind note: Pharos Control is not affected.
Available Solutions:
So far, the TP-Link team has fixed the vulnerability on the cloud platforms, including Omada Cloud-Access.
For Local Omada Controllers, you may install the Beta firmware below for an emergency solution.
Omada SDN Controller:
Omada_Controller_V5.0.15_Windows (Beta)
Omada_Controller_V4.4.6_Linux_x64.tar (Beta)
Omada_Controller_V4.4.6_Linux_x64.deb (Beta)
OC200(UN)_V1_1.14.1_20211213 (Beta) -- Built-in Omada Controller v5.0.21
OC300(UN)_V1_1.2.4_20211213 (Beta) -- Built-in Omada Controller v4.4.6
Omada Controller V3.2.14:
Omada_Controller_V3.2.15_Windows_32bit (Beta)
Omada_Controller_V3.2.15_Windows_64bit (Beta)
Omada_Controller_V3.2.15_Linux_x64.tar (Beta)
Omada_Controller_V3.2.15_Linux_x64.deb (Beta)
OC200(UN)_V1_1.2.5_Build 20211214 (Beta)
Note: The Beta firmware provided above has updated log4j version to 2.15.0 to fix the original vulnerability (CVE-2021-44228).
Here are the official releases for Omada SDN Controllers to fix the vulnerability:
Omada_Controller_V4.4.8_Linux_x64.tar Release Note >
Omada_Controller_V4.4.8_Linux_x64.deb Release Note >
Omada_Controller_V5.0.30_Windows Release Note >
Omada_Controller_V5.0.30_Linux_x64.tar Release Note >
Omada_Controller_V5.0.30_Linux_x64.deb Release Note >
OC200(UN)_V1_1.14.3 Build 20220112 Release Note > Built-in Omada Controller v5.0.30
OC300(UN)_V1_1.7.1 Build 20220112 Release Note > Built-in Omada Controller v5.0.30
Kind Note:
1. The Official firmware provided above has updated log4j version to 2.16.0 to fix the followed vulnerability (CVE-2021-45046).
2. Omada Controllers or Services are NOT affected by the last vulnerability (CVE-2021-45105).
But TP-Link still released a new official firmware to upgrade log4j version to 2.17.0.
The following Omada SDN Controller v5 has upgraded log4j version to 2.17.0:
Omada_Controller_v5.1.7_Linux_x64.tar.gz Full Release Note >
Omada_Controller_v5.1.7_Linux_x64.deb Full Release Note >
Omada_Controller_v5.1.7_Windows Full Release Note >
OC200(UN)_V1_1.15.2_20220323 Full Release Note > Built-in Omada Controller v5.1.7
OC200(UN)_V2_2.1.2_20220323 Full Release Note > Built-in Omada Controller v5.1.7
OC300(UN)_V1_1.8.2 Build 20220411 Full Release Note > Built-in Omada Controller v5.1.8
The following Omada Controller v3 has upgraded log4j version to 2.17.0:
Omada_Controller_V3.2.16_Windows_32bit Release Note >
Omada_Controller_v3.2.16_Windows_64bit Release Note >
Omada_Controller_v3.2.16_Linux_x64.deb Release Note >
Omada_Controller_V3.2.16_Linux_x64.tar Release Note >
OC200(UN)_V1_1.2.6_Build 20211230 Release Note >
The following Omada Discovery Utility version has upgraded log4j version to 2.16.0:
Omada Discovery Utility 5.0.8 Release Note >
> upgraded log4j version to 2.16.0 to avoid remote code execution vulnerability in Apache log4j2.
This solution post has been updated completely by May 18, 2022.
Thank you for your attention!
References:
Solution Updated Records:
- Updated on 15th December 2021:
1. Add the Beta firmware for old Omada Controller v3.2.14.
2. Add the official firmware for Omada Controller v5.0.27 Windows.
Note: If you are using older Omada Controller, and wondering whether you can upgrade SDN Controller, you may refer to the guide below for a quick answer.
Frequently asked questions of Omada SDN solution related to upgrading and management
- Updated on 16 December 2021:
It was found that the fix to address CVE-2021-44228 in Apache Log4j 2.15.0 was incomplete in certain non-default configurations. So the coming official firmware will update log4j version to 2.16.0 (CVE-2021-45046).
- Updated on 17 December 2021:
Add the official firmware for Omada Software Controller v4/v5, which updated log4j version to 2.16.0 (CVE-2021-45046)
- Updated on 21 December 2021:
Add the official firmware for Omada SDN Controller OC200/OC300, which updated log4j version to 2.16.0 (CVE-2021-45046)
- Updated on 22 December 2021:
Add a Kind Note:
3. Omada Controllers or Services are NOT affected by the last vulnerability (CVE-2021-45105).
But TP-Link will still release a new official firmware soon to upgrade log4j version to 2.17.0.
4. The official firmware for Omada Controller v3.2.14 will also upgrade log4j version to 2.17.0, which will be released afterwards.
- Updated on 9 January 2022:
Add official firmware for Omada Controller v5.0.29 (Linux) and Omada Discovery Utility v5.0.8, which updated log4j version to 2.16.0 (CVE-2021-45046).
- Updated on 26 January 2022:
Add official firmware for Omada Software Controller v3.2.16, which updated log4j version to 2.17.0.
- Updated on 10 February 2022:
Add official firmware for Omada Hardware Controller OC200 with built-in Controller v3.2.16, which updated log4j version to 2.17.0.
Replaced the Omada Controller v5.0.29 firmware with the Controller v5.0.30 (it's the later version which has fixed some issues came from v5.0.29).
- Updated on 7 May 2022:
Add official firmware for Omada Software Controller v5.1.7 and OC200 with built-in Controller v5.1.7, which updated log4j version to 2.17.0.
- Updated on 18 May 2022:
Add official firmware for OC300 with built-in Controller v5.1.8, which updated log4j version to 2.17.0.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Will there be another release soon given that CVE-2021-45046 on Log4j 2.15.0 has been upgraded to a RCE?
https://www.lunasec.io/docs/blog/log4j-zero-day-severity-of-cve-2021-45046-increased/
- Copy Link
- Report Inappropriate Content
Dear @WirelessForEver,
WirelessForEver wrote
Will there be another release soon given that CVE-2021-45046 on Log4j 2.15.0 has been upgraded to a RCE?
https://www.lunasec.io/docs/blog/log4j-zero-day-severity-of-cve-2021-45046-increased/
Yes, I just updated this solution post with the official firmware for Omada Controller v4/v5.
Please kindly check the main body for details. Cheers!
- Copy Link
- Report Inappropriate Content
Fae wrote
Dear @WirelessForEver,
WirelessForEver wrote
Will there be another release soon given that CVE-2021-45046 on Log4j 2.15.0 has been upgraded to a RCE?
https://www.lunasec.io/docs/blog/log4j-zero-day-severity-of-cve-2021-45046-increased/
Yes, I just updated this solution post with the official firmware for Omada Controller v4/v5.
Please kindly check the main body for details. Cheers!
Perfect! I see that now!
FYI, you may want to update this part too given the increase in severity:
CVE-2021-45046: https://www.cve.org/CVERecord?id=CVE-2021-45046
Severity: Moderate
Base CVSS Score: 3.7 (AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L)
to
CVE-2021-45046: https://www.cve.org/CVERecord?id=CVE-2021-45046
Severity: Critical
Base CVSS Score: 9.0 (AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H)
- Copy Link
- Report Inappropriate Content
Dear @WirelessForEver,
WirelessForEver wrote
FYI, you may want to update this part too given the increase in severity:
CVE-2021-45046: https://www.cve.org/CVERecord?id=CVE-2021-45046
Severity: Moderate
Base CVSS Score: 3.7 (AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L)
to
CVE-2021-45046: https://www.cve.org/CVERecord?id=CVE-2021-45046
Severity: Critical
Base CVSS Score: 9.0 (AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H)
Thank you for your information. Updated now.
- Copy Link
- Report Inappropriate Content
Restore fails from 3.2.15 to 5.0.29 Windows.
Thanks guys.
- Copy Link
- Report Inappropriate Content
@Fae First I want to give you a huge THANK YOU for being so responsive and forthcoming with information. It's been such a relief. I do have another follow-up question for you: my OC300 controller version is 4.3.5, and the firmware is indicating 1.1.0 build 20210406 Rel.58776. Do you anticipate that I will be able to update directly to the latest patch when it is available?
- Copy Link
- Report Inappropriate Content
@Fae As the firmware of controllers has been behind for quite a while compared to software version (5.0.29 on Windows and 4.4.6 for both OC200/300 firmware), when can we expect the latest patches?
- Copy Link
- Report Inappropriate Content
@nullV Earlier in the thread Fae was saying mid- to late next week.
- Copy Link
- Report Inappropriate Content
I have OC200 with the foll. details:
Controller Version: 4.4.6
Model: OC200 1.0
Firmware Version: 1.9.3 Build 20210914 Rel.39903
Which patch should I be installing for this?
OC200(UN)_V1_1.14.1_20211213 (Beta) -- Built-in Omada Controller v5.0.21
OR
OC200(UN)_V1_1.2.5_Build 20211214 (Beta)
- Copy Link
- Report Inappropriate Content
Yet another critical vulnerability was found, requiring an upgrade to 2.17.0:
https://logging.apache.org/log4j/2.x/security.html
- Copy Link
- Report Inappropriate Content
Information
Helpful: 11
Views: 39654
Replies: 66
Voters 9
