EAP Firmwares
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi! I would like to see if anybody can advice when would TP-Link released a new firmware version for EAP 660 and EAP 620??? Its has been so long and i'm just disappointed. The firmware support is totally non-existence. I had high hopes for their Omada eco-system as a alternative to Unifi Eco system. But after waiting for new firmwares, i have lost all hopes.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @MrNetworkM21,
MrNetworkM21 wrote
I would like to see if anybody can advice when would TP-Link released a new firmware version for EAP 660 and EAP 620??? Its has been so long and i'm just disappointed. The firmware support is totally non-existence. I had high hopes for their Omada eco-system as a alternative to Unifi Eco system. But after waiting for new firmwares, i have lost all hopes.
Are you using EAP660 HD/EAP620 HD V1?
The EAP660 HD/EAP620 HD V1 firmware has been released earlier this month.
EAP660HD(US)_V1_1.0.6 Build 20210729
EAP620HD(US)_V1_1.0.6 Build 20210730
Note: the firmware above is also suitable for the EU version.
- Copy Link
- Report Inappropriate Content
Dear @MrNetworkM21,
MrNetworkM21 wrote
I would like to see if anybody can advice when would TP-Link released a new firmware version for EAP 660 and EAP 620??? Its has been so long and i'm just disappointed. The firmware support is totally non-existence. I had high hopes for their Omada eco-system as a alternative to Unifi Eco system. But after waiting for new firmwares, i have lost all hopes.
Are you using EAP660 HD/EAP620 HD V1?
The EAP660 HD/EAP620 HD V1 firmware has been released earlier this month.
EAP660HD(US)_V1_1.0.6 Build 20210729
EAP620HD(US)_V1_1.0.6 Build 20210730
Note: the firmware above is also suitable for the EU version.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Dear @MrNetworkM21,
MrNetworkM21 wrote
Hi, thank you for your reply! Yes im using V1. However, it is the US set i'm using. Any updates on new the cycle of future updates? The version i'm using now is 1.0.5 which was released back in March 2021. So its been 8 months since the last updates. I hope you could feedback to the team to push for more stable firmware release as i believe this AP has a lot of potential. And do you have any ideas on when would 1.0.6 be released for the US version?
I've forwarded this feedback to the local team to upload the new firmware in time. Thank you for your valued feedback!
The download link for the US version has been attached in my first reply, you can also follow the link to download the new firmware.
- Copy Link
- Report Inappropriate Content
@Fae sorry for opening this thread again.
Is this beta firmware? I have successfully installed it on EAP660, and it seems to be ok. Using controller OC200.
But it seems like power save U-APSD is not working anymore, as all devices shows "power save disabled" in the statistics tab on the controller.
It is enabled on the EAP.
Previous build of 1.0.6 did have this working, and the controller also did show an icon for devices sleeping. This icon is not showing anymore.
best regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Dear @Mortensen,
Mortensen wrote
Is this beta firmware? I have successfully installed it on EAP660, and it seems to be ok. Using controller OC200.
But it seems like power save U-APSD is not working anymore, as all devices shows "power save disabled" in the statistics tab on the controller.
It's official firmware, not beta.
Could you please elaborate on the power save problem with some screenshots?
- Copy Link
- Report Inappropriate Content
@Fae hi again, sorry for the trouble.
A power cycle of the EAP fixed it, now it is working again. See below (The green icon and the status). Interesting thing is that a reboot did not help, but pulling the power plug did.
- Copy Link
- Report Inappropriate Content
Dear @Mortensen,
Mortensen wrote
@Fae hi again, sorry for the trouble.
A power cycle of the EAP fixed it, now it is working again. See below (The green icon and the status). Interesting thing is that a reboot did not help, but pulling the power plug did.
No need sorry for this, you are welcome to report the problem on the community forums.
Thank you for your valued feedback. Glad to hear that you have resolved the problem and it's working again.
- Copy Link
- Report Inappropriate Content
I see the US and EU version are updated. Any idea when the Canadian version will be? all the interesting features are in this new firmware which is not availabe to Canada yet.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1742
Replies: 9
Voters 0
No one has voted for it yet.