Business Community > Routers > Ipsec does not connect. PPTP works with issues
< Routers

Ipsec does not connect. PPTP works with issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ipsec does not connect. PPTP works with issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ipsec does not connect. PPTP works with issues
Ipsec does not connect. PPTP works with issues
2013-05-14 15:58:55 - last edited 2021-08-21 03:30:54
Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version :

ISP :

Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version :

ISP :

Region : India

Model : TL-ER6120

Hardware Version : V1

Firmware Version : R600VPN v1 00000000

ISP : BSNL

Region : India

Model : TL-ER6120

Hardware Version : V1

Firmware Version : R600VPN v1 00000000

ISP : BSNL

Region : India

Model : TL-R600VPN

Hardware Version : V1

Firmware Version : R600VPN v1 00000000

ISP : BSNL

Dear All,

I am installing a VPN router R600 VPN to connect my server 2003 OS from remote offices. Server IP No is 192.168.5.250. Router IP number is 192.168.5.249. My client offices run on 192.168.2.X. Some 10 clients will be connecting.

I am having a great problem in setting up IPsec with the tutorial given on TP-LINK site. Right now I am using PPTP to connect my server but some times it does not accept connection even when the ISP is up.

Restarting the router manually makes PPTP work again. Kindly guide me to either configure IPsec or to fix the PPTP issue.

Thanks in advance
Vaschell
  0      
 
  0      
 
#1
Options
9 Reply
Re:Ipsec does not connect. PPTP works with issues
2013-05-15 10:51:01 - last edited 2021-08-21 03:30:54
whether you have checked this FAQ? http://www.tp-link.com/en/article/?faqid=380
it's very easy to establish IPsec VPN between 6120 and 600VPN.
also i think before you try to establish it, you need to confirm the WAN ip addresses of the two routers are correct. also they can ping each other.
thank you!
  0  
  0  
#2
Options
TL-R600VPN Ipsec support
2013-05-16 17:09:11 - last edited 2021-08-21 03:30:54
Region : India

Model : TL-R600VPN

Hardware Version : V1

Firmware Version : 1.0.0 Build 111028 Rel.51449n

ISP : BSNL

Dear all,

I am new to TP link products and using a R600 VPN to connect my server by VPN. As of now i use PPTP to connect. I tried configuring Ipsec by reading the online tutorial but did not work.

My parameters,

Server IP No. 192.168.5.250
TPLINK VPN router 192.168.5.249

Clients mostly connect in 192.168.2.x series. Kindly support me in configuring the same to accept Ipsec connection. I am quite confused about the below

Local Subnet: /
Remote Subnet: /
Remote Gateway: (IP or domain name)

I am very basic in networking and kindly guide through.

Regards,
vaschell
  0  
  0  
#3
Options
PPTP WOrk only on restart
2013-08-08 20:18:37 - last edited 2021-08-21 03:30:54
I am setting up this router to accept a PPTP connection. Connection to router works fine and after a while it does not accept the connection IT works after a restart of the router. What settings have to be tweaked to fix this.

Using Model : TL-R600VPN

vaschell
  0  
  0  
#4
Options
Re:Ipsec does not connect. PPTP works with issues
2013-08-09 15:59:23 - last edited 2021-08-21 03:30:54
Thanks for your reply. But I am actually trying to connect from end clients. I have setup the router to accept PPTP connections and it works fine for a day or two. after a while I am able to ping the ip but does not accept a VPN connection.

Reboot of the router works. Kindly let me know what has to be done to make the router to accept PPTP connections 24 x 7

Regards,
Vaschell
  0  
  0  
#5
Options
Re:Ipsec does not connect. PPTP works with issues
2013-08-13 21:15:21 - last edited 2021-08-21 03:30:54
Same problem here.
  0  
  0  
#6
Options
same problem
2013-08-14 18:09:20 - last edited 2021-08-21 03:30:54
i have the same problem with PPTP VPN's work ok for a day or so then hang.
just disable then enable pptp module clears the problem, but not a real fix, also adding more available ip addresses seems to extend the uptime of pptp, not 100% on this yet.
  0  
  0  
#7
Options
Every morning restart
2013-08-20 23:49:48 - last edited 2021-08-21 03:30:54
Hi,

I have a TL-R600VPN with last firmware and need to be restarted every morning for PPTP to work. Please TP-LINK find a solution fast for this issue.


Regards,
Calin
  0  
  0  
#8
Options
PPTP problem
2013-08-21 23:01:47 - last edited 2021-08-21 03:30:54
Same problem, if I disable and enable the PPTP it works again without rebooting the router. The router has the latest firmware.
  0  
  0  
#9
Options
Re:Ipsec does not connect. PPTP works with issues
2013-08-26 22:56:52 - last edited 2021-08-21 03:30:54
hi to all,
i have the same pb with tlr 600 vpn. it comes from chinesses attack.
read the thread http://forum.tp-link.com/showthread.php?47302-TL-R600VPN-stopped-working-with-VPN&region=china
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 1901

Replies: 9

Related Articles
 PPTP Over Site to Site ipsec
1563 0
Unable to connect to IPsec VPN
1343 2
 pptp versus ipsec towards LAN port
592 1
 IPsec VPN issues
562 0
 TL-R600VPN PPTP - unable to connect to PPTP server
2455 0
 IPSec SA Established, but ping only works one way
1605 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.