Virtual Server cannot forward to server
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Virtual Server cannot forward to server
Region : Indonesia
Model : TL-R600VPN
Hardware Version : V1
Firmware Version : 1.2.0
ISP : Biz Net
Hello,
a couple days ago i was bought TL-R600VPN router because i read there's was full of function with best buy price, but after replacing my old Router, there's so many problem that it can't just install and done like the other routers done,
This is my setting for WAN
STATIC IP
IP Add : 182.253.204.154
Subnet Mask : 255.255.255.248
Default Gateway : 182.253.204.153
MTU Size : 1500
Primary DNS : 203.142.84.222
Secondary DNS : 203.142.82.222
Setting for LAN
IP Address : 192.168.0.1
Subnet : 255.255.255.0
I just want to Port forwarding listen at port 8081 and direct request handle to my LAN IP : 192.168.0.23 so i set on menu : Forwarding->Virtual Server and setup :
Service Port : 8081
Internal Port : (blank)
IP Address : 192.168.0.23
Protocol : All
Status : Enabled
Common Service Port : (blank)
save it and add to list on display Virtual Server, i hope this configuration can work, but after many test on browser it cannot run and fail.
Can anybody help to solve my problem?, all your help and comment, i'll appreciate :)
Model : TL-R600VPN
Hardware Version : V1
Firmware Version : 1.2.0
ISP : Biz Net
Hello,
a couple days ago i was bought TL-R600VPN router because i read there's was full of function with best buy price, but after replacing my old Router, there's so many problem that it can't just install and done like the other routers done,
This is my setting for WAN
STATIC IP
IP Add : 182.253.204.154
Subnet Mask : 255.255.255.248
Default Gateway : 182.253.204.153
MTU Size : 1500
Primary DNS : 203.142.84.222
Secondary DNS : 203.142.82.222
Setting for LAN
IP Address : 192.168.0.1
Subnet : 255.255.255.0
I just want to Port forwarding listen at port 8081 and direct request handle to my LAN IP : 192.168.0.23 so i set on menu : Forwarding->Virtual Server and setup :
Service Port : 8081
Internal Port : (blank)
IP Address : 192.168.0.23
Protocol : All
Status : Enabled
Common Service Port : (blank)
save it and add to list on display Virtual Server, i hope this configuration can work, but after many test on browser it cannot run and fail.
Can anybody help to solve my problem?, all your help and comment, i'll appreciate :)