Failed to readopt
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, I am experiencing a issue with my EAPs (225 and 110) suddenly got disconnected or heartbeat missed. Both EAPs are installed using their own power supply (PoE) 110 is installed on Switch A, i continuously ping this Switch but it's on good connection with 1ms latency. the 225 is installed on different switch (lets name it Switch B) but there are two 225 in that Switch and only the one is disconnecting, and similar to Switch A, the ping is on good with 1ms latency. My action is to re-plug the power supply, it works on 110 but after 4 days, it happens again. i haven't tried to re-plug the power supply of it yet.
The 225 Failed to readopt 5 times automatically as of now
The 110 failed to readopt 2 times automatically as of now
Model: EAP 225
HV: 3
FV: 5.0.2
Model: EAP110
HV: 4
FV: 5.0.1
Controller: OC200 1.0
Version: 4.3.5
Any help would be appreciated.
Thanks!
This is my network
I cannot do it right now because im doing all of this remotely, my PC is connected to the same switch as the OC200 is connected.
All of this log is the EAP225
I tried pinging the EAP225, it also show a good connection with 1ms latency. while doing this the status is adopt failed.