Hi,

Just wondering if anyone has come across this problem yet, or got a workaround.

I have had my TL-SG 3428XMP connected to a Netgear switch via port 26 (SFP). I had the speed manually configured to 1000mbps and it worked ok under version 1.0.2 firmware and controlled via OC200.

I have just upgraded the firmware on the switch to 1.0.3 and the SFP port will not connect to the Netgear whilst using the controller. (manually setting the speed to 1000mbps via. the controller). If I forget the switch and connect via. the IP address I can configure port 26 to 1000mbps and set the Duplex to Auto and it connects perfectly to the Netgear.

If I then adopt the switch via the controller port 26 disconnects. No matter what settings I configure for the port on the controller I cannot get it to connect to the Netgear.

Is this a bug in the latest firmware? As a workaround I will have to run the switch in stand alone mode which I don't really want to do, but I cant get it to work any otherway.

Anybody got any thoughts or something I can try other than roll back the firmware to 1.0.2?

UPDATE....Just rolled back to firmware 1.0.2 and port 26 can be configured in the controller and works perfect. Definitely a problem with 1.0.3

Many thanks in advance.

Cliff