@WesWalker 

Hi,

if the gateway is adopted by Omada, you cannot manage it on WebGui, you have to manage it in Omada SDN.

Best Regards

@Emitplink So if I understand correctly, the tp-link WEB login for the gateway is completely useless and has no valid username/password, right? A related question is, how to access the Router's configuration interface (assuming there is one like 192.168.100.1)?

@WesWalker 

hi there, if your router has been managed by the controller, when you try to log in to the router's web management page you can see this error message.

First, you need to reset the router by pressing the reset button for 5 seconds, after that you can connect the PC back of router, using 192.168.0.1 to login. The username and password are both "admin".

Best Regards!

John1234 wrote

@WesWalker 

 

hi there, if your router has been managed by the controller, when you try to log in to the router's web management page you can see this error message.

First, you need to reset the router by pressing the reset button for 5 seconds, after that you can connect the PC back of router, using 192.168.0.1 to login. The username and password are both "admin".

 

Best Regards!

@John1234 

The gateway IP adres can be found in the omada controler, and you can than login the gateway eg. a Interproviders router.