Map is incorrect despite LLDP is enabled on all devices (also other vendors)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Map is incorrect despite LLDP is enabled on all devices (also other vendors)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Map is incorrect despite LLDP is enabled on all devices (also other vendors)
Map is incorrect despite LLDP is enabled on all devices (also other vendors)
2021-05-25 14:44:07
Model: OC200  
Hardware Version: V1
Firmware Version: 1.8.0 Build 20210406 Rel.58757

Within my network I've several network components

  • OC200
  • 4x EAP225
  • TL-R605

 

But also the following switches from another vendor:

  • 1x Zyxel GS1900-24E
  • 2x Zyxel GS1900-8

 

On the Zyxel I've, just like with the TP-Link components, enabled LLDP. When looking in the 'network map' of the OC200 it shows up as 'not connected', while the Zyxel do show all the different components.

AP2, AP3 and AP4 are all connected to the same switch and only AP2 shows as 'connected' in the map.

 

Would be really nice if the mapping is also 'enabled' for other devices that support LLDP.

(Yes of course, can invest in new TP-Link switches, but these are still running OK... cool)

  1      
  1      
#1
Options
2 Reply
Re:Map is incorrect despite LLDP is enabled on all devices (also other vendors)
2021-05-26 02:53:34

@paderijk 

Hi there, how about upgrade the firmware version of all your EAP225 to the latest one. The controller version for the Controller is 4.3.5, maybe you can try to upgrade all EAP to the latest first.

Currently, it seems that the ER605's firmware related to Controller version 4.3.5 is not released(in few days maybe), you can also upgrade firmware for ER605 too in future.

 

Take Care!

  0  
  0  
#2
Options
Re:Map is incorrect despite LLDP is enabled on all devices (also other vendors)
2021-05-26 05:07:16

@John1234  - All is up to date I'm running controller version 4.3.5 (it's the firmware version of it which is 1.8.0), EAPs are on 5.0.3 and the TL-R605 on 1.0.1. 

  1  
  1  
#3
Options