Dear @Gomapping,

Gomapping wrote

i have a question about schedule.

i need open the POE power every day morning 8:00am to next day 2:00am.

How can i setting up the time. because the schedule only can set until 00:00 only. 

As I know, the PoE Schedule function will be modified on the Omada Controller v5.x in the near future.

At present, we need to create two PoE schedule rules to make it.

Dear @Le0n,

Le0n wrote

the issue is that this solution will restart the router at 12AM before the second time range starts.

When you say the router, do you mean the PoE switch that supplies power over Ethernet to the powered devices?

If not, may I know the model number of the router? How is the router connected to your network?

Do you find any controller Logs at 12 AM when the router gets restarted?

What's the model number and firmware version of your TP-Link PoE switch?

Dear @Le0n,

Le0n wrote

at 12AM it couldn't run the second schedule because first schedule was shutting down ports on the switch. it was showing a log like  "Second POE schedule failed to execute" and then it was showing my APs were disconnected. After a few minutes APs were up again.

I configured a PoE schedule at 11:25PM to enable PoE power for 3 ports during 11:30pm-00:00am and 00:00am-1:30am. It's turned to work as expected: the PoE schedule executed on the desired ports properly, connected EAPs were powered up and working during the time range I set, there was no disconnection at 00:00AM at all.

Below is the Event System Log I found:

Could you please test one more time to confirm whether you can reproduce the problem steadily?