Business Community > Routers > I CANNOT ENTER MY BANK
< Routers

I CANNOT ENTER MY BANK

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I CANNOT ENTER MY BANK

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I CANNOT ENTER MY BANK
I CANNOT ENTER MY BANK
2021-04-18 21:33:53 - last edited 2021-04-22 11:33:20
Model: TL-R470T+  
Hardware Version: V6
Firmware Version: 6.0.3 Build 20180731 Rel.56894

Good afternoon I have a TL-R470 + balancer in which I balance 3 adsl lines, everything is fine, the bandwidth, I balance everything in order, but when trying to access a bank, especially legal, it rejects the connection, given it explains to me the support of the bank that the bank detects 3 ip you publish at the same time so the bank's platform rejects the connection. I hope help me thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:I CANNOT ENTER MY BANK-Solution
2021-04-20 07:44:29 - last edited 2021-04-22 11:33:20

@eyp 

 

Have you enabled "Enable Application Optimized Routing" in Load balancing options?   This will ensure that same WAN is used for the multiple request to the same destination from same source. 

 

If the above doesnt work, you can setup a static route to the bank's IP network using one of the WANs. This will ensure that all requests to the bank is served by same WAN all the time. 

 

Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:I CANNOT ENTER MY BANK-Solution
2021-04-20 07:44:29 - last edited 2021-04-22 11:33:20

@eyp 

 

Have you enabled "Enable Application Optimized Routing" in Load balancing options?   This will ensure that same WAN is used for the multiple request to the same destination from same source. 

 

If the above doesnt work, you can setup a static route to the bank's IP network using one of the WANs. This will ensure that all requests to the bank is served by same WAN all the time. 

 

Recommended Solution
  1  
  1  
#2
Options
Re:I CANNOT ENTER MY BANK
2021-04-22 12:19:19

@Landcruiser

thanks for your time and reply. The first option he gave me I have enabled since I bought it, and it does not work for me.

 

and this I have no idea how to mark the packages:

If the above doesnt work, you can setup a static route to the bank's IP network using one of the WANs. This will ensure that all requests to the bank is served by same WAN all the time. 

 

 

  0  
  0  
#3
Options
Re:I CANNOT ENTER MY BANK
2021-04-23 07:14:05

@eyp 

 

 

Please refer to the section 6.1 of the user guide to get help on configuring static route on . (there may some UI variations in your router)

https://static.tp-link.com/2018/201811/20181109/1910012492_TL-R480T470T_UG.pdf

 

How to find the IP address of you bank?

1. Ping the domain name of your bank that you are accessing. (eg. ping savings.bank.com )

2. you will get an IP address.  (eg. 124.125.126.130)

3. configure the entire subnet to be routed using one WAN. (eg 124.125.126.130/24)

 

Hope this helps.

 

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1131

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.