Wall + outdoor + Poe = fail
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wall + outdoor + Poe = fail
I have both an EAP235-wall and an EAP225-outdoor AP's, and a proper 802.3af/at injector (Tripp-lite NPOE-30W-1G).
The wall plate works with the tripp-lite injector, but not the outdoor AP. I tried both directly plugging the outdoor AP to the injector and to the PoE out port of the wall plate, the outdoor AP does not light up.
I tested the outdoor AP plugged in it's 48V injector. That works, so the AP is good.
What's happening? Both AP's are 802.3af compliant, and the wall is also 802.3at compliant. I need to daisy-chain those AP's because of wiring constraints, and the specs lead me to think it works.