Wired Clients not showing connected on Omada
Network has 50 clients with 25 being wired connections. Often 5-10 wired clients are missing from Omada's clients list for hours. The missing clients are connected and using a small amount of bandwidth. All the wifi clients are connecting through EAP's and are showing in Omada. The ER605 is the only DHCP server on the network.
If I force a missing client to use a lot of bandwidth sometimes it will then show up in Omada. If I log out and back in to Omada some times a few of the missing clients will appear.
Network consists of: Modem--> ER605 router-->unmanaged switch-->wired clients/EAP wireless.
Omada is running on an OC200 V1 with controller version 4.2.11. The ER605 is hardware V1 and firmware is 1.0.1 Build 20210113 Rel.35074.
Showing connected clients should be a very basic requirement of Omada. Is this being investigated/resolved?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @d0ugmac1 Well that's not cool at all... I think these devices are priced and must have a professional grade where these things shouldn't be a problem.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I agree with what you write. I think that the functionality of the Omada controller is still green in many aspects of it and it still has time to be considered "professional grade" or "enterprise grade". I don't know, I just entered in the Omada world and I thought that certain things that I consider "basic", like the one discussed in the subject of this post, would already be far surpassed, but I see that they are not.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 8865
Replies: 24