OC200 Time and Date via NTP Server - *SOLVED*
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi guys,
Recently I faced issues with synchronizing time via NTP Server on my OC200 in my home Network.
I have tried setting different and well known NTP Servers to no avail, until I found a setting in my Main Router (AVM Fritz!Box 7590) that allowed clients to “only surf and mail” (Screenshot below).
My topology is really straight forward: AVM Fritz!Box 7590>OC200
AVM Fritz!Box up to date with the latest Firmware.
OC200 up to date with OC200(UN)_V1_1.7.3 Build 20201119
Controller Version 4.2.8
The OC200 is connected to LAN 4 of my Router which is set up as Guest-LAN in the following manner via the Fritz!Box:
Under the Guest Network settings the below option can be found:
“Limit Internet Services: Only Surf and Mail ”
I can confirm that by disabling said Option the OC200 can receive correct time and date via NTP Server.
