r605 compatibility question
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
can i use a R605 + bt ADSL + Netgear lb2120 to create a failover broadband connection?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Im not fimiliar with the Huawei 535 personally but from what i can see it should just act like any other ISP router. Connect a LAN port on the 535 to one of the WAN ports on the R605 and you should be fine.
Im guessing its this thing you are referring to?
https://3g.co.uk/reviews/huawei-b535-webbox-review
What are you seeing when you connect the 535? The R605 should be configured on AUTO DCHP for the 2nd WAN port as the 535 is likely to hand out a DHCP to the R605
Post any screenshot you might have to help us help you
- Copy Link
- Report Inappropriate Content
Hey
I use the R605 with Plusnet Internet (owned by BT) with a spare 4g backup setup similiar to you, it works fine so cant see this being any differnet for you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
No sorry i dont
I use a TL-MR3020 for my EE 4g connection as it was the cheapest i could find around at 18m ago. Havent had to use it outside travel use but it does work when the ADSL does drop out, granted not very often!
- Copy Link
- Report Inappropriate Content
@Philbert thanks for the reply, i'll give that one a try
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Im not fimiliar with the Huawei 535 personally but from what i can see it should just act like any other ISP router. Connect a LAN port on the 535 to one of the WAN ports on the R605 and you should be fine.
Im guessing its this thing you are referring to?
https://3g.co.uk/reviews/huawei-b535-webbox-review
What are you seeing when you connect the 535? The R605 should be configured on AUTO DCHP for the 2nd WAN port as the 535 is likely to hand out a DHCP to the R605
Post any screenshot you might have to help us help you
- Copy Link
- Report Inappropriate Content
Thanks for the continued help
when I connect it to the wan post it tries to connect but fails, I had the same thing with the BT homehub router.
I swapped out the BT homehub for a third-party router which allowed bridging and it connected the wan to the BT network.
the 3 router does not support bridging,
suggestions gratefully recieved
- Copy Link
- Report Inappropriate Content
ok got it
seems I miss interpreted what was going on, can now confirm I have BT and 3 running as expected thank you Philbert for your help once again .
- Copy Link
- Report Inappropriate Content
Haha you beat me too it!!
Was just about to reply and say you dont need to bridge the connections, glad you got it working however!
Not a problem, glad you got sorted mate :)
Phil
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1760
Replies: 10
Voters 0
No one has voted for it yet.