TL-SG108E Vlan Setting - 2 VLANs, Wrong DHCP IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG108E Vlan Setting - 2 VLANs, Wrong DHCP IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

eduardoll

2021-02-21 05:33:58 - last edited 2021-02-21 05:35:04

Posts: 1

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2021-02-21

TL-SG108E Vlan Setting - 2 VLANs, Wrong DHCP IP

2021-02-21 05:33:58 - last edited 2021-02-21 05:35:04

Model: TL-SG108E

Hardware Version:

Firmware Version:

Hi,

I have my secondary switch configured as follows:

It is plugged into port 1 and set to get ip using DHCP.

Question: that switch is getting an IP from VLAN 10. I was expecting it would get an ip from VLAN 1. Am I doing something wrong?

It`s cable comes from an Unifi Switch - port profile is configured as "ALL vlans"

Can you help me figure out why is that happening?

Thanks in advance.

1 Reply

godje.nl

LV1

2021-04-15 09:32:46

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2021-04-15

Re:TL-SG108E Vlan Setting - 2 VLANs, Wrong DHCP IP

2021-04-15 09:32:46

I have exactly the same issue with a TL-SG108e-v5 while the other side of the trunk is a switch of almost the same TP-link switch TL-SG108e-v3, so I think it is not an issue of your Unify switch . Fixed it by assigning a static ip to the switch, but this is not the desired solution. I also hope someone has a better solution to fix this without a static IP.

TL-SG108E Vlan Setting - 2 VLANs, Wrong DHCP IP

TL-SG108E Vlan Setting - 2 VLANs, Wrong DHCP IP

Information

Voters 1

Tags