EAP620 HD Missing Many 5GHz Channels
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
Upon trying to configure my new EAP620 HD I see there are only four 5GHz channels available to select: 36, 40, 44, 48. All others are missing. It appears to be a bug.
The limitation is there whether I set it up standalone or if I adopt it into a Cloud SDN Controller. When channel is "Auto" I see it always picks these channels, never higher, so I am unable to design my wireless network as desired.
Any help or ideas would be appreciated. Thank you in advance!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What about EAP660HD firmware, almost 1 year and no any for EU models ? Good hardware used, but your developers still sleeping......
- Copy Link
- Report Inappropriate Content
Hi @Fae
I am in Australia. Have an EAP620 HD V1, US model.
I am also unable to use any DFS channels, whether it is standalone or with a controller.
I only have channels
* 36-48
* 149-161
* 165, if 20MHz bandwidth
Have tried these US firmwares with no luck:
* 1.0.5 build 20201119
* 1.0.6 build 20210730
* 1.1.0 build 20211028
Are there any plans to enable it?
- Copy Link
- Report Inappropriate Content
Dear @Cendana,
Cendana wrote
I am in Australia. Have an EAP620 HD V1, US model.
I am also unable to use any DFS channels, whether it is standalone or with a controller.
I only have channels
* 36-48
* 149-161
* 165, if 20MHz bandwidth
Have tried these US firmwares with no luck:
* 1.0.5 build 20201119
* 1.0.6 build 20210730
* 1.1.0 build 20211028
Are there any plans to enable it?
FYI, it's planned to add DFS channels in the subsequent firmware updates.
Please check for the new firmware release notes for final confirmation. Thank you!
- Copy Link
- Report Inappropriate Content
Fae wrote
Dear @Cendana,
Cendana wrote
I am in Australia. Have an EAP620 HD V1, US model.
I am also unable to use any DFS channels, whether it is standalone or with a controller.
I only have channels
* 36-48
* 149-161
* 165, if 20MHz bandwidth
Have tried these US firmwares with no luck:
* 1.0.5 build 20201119
* 1.0.6 build 20210730
* 1.1.0 build 20211028
Are there any plans to enable it?
FYI, it's planned to add DFS channels in the subsequent firmware updates.
Please check for the new firmware release notes for final confirmation. Thank you!
Hi @Fae
I have 1.1.0 build 20211028 installed and is the newest one I can find?
Is there anything newer available?
- Copy Link
- Report Inappropriate Content
Dear @Cendana,
Cendana wrote
I have 1.1.0 build 20211028 installed and is the newest one I can find?
Is there anything newer available?
I think you already have the newest firmware for your EAP620HD V1.
[New Firmware] The Mesh firmware for EAP660HD(EU&US)_V1 and EAP620HD(EU&US)_V1 has been released
- Copy Link
- Report Inappropriate Content
Fae wrote
Dear @Cendana,
Cendana wrote
I have 1.1.0 build 20211028 installed and is the newest one I can find?
Is there anything newer available?
I think you already have the newest firmware for your EAP620HD V1.
[New Firmware] The Mesh firmware for EAP660HD(EU&US)_V1 and EAP620HD(EU&US)_V1 has been released
Thanks @Fae , do you have any approximate ETA for the DFS builds, including any betas?
- Copy Link
- Report Inappropriate Content
Hello Everyone,
I confirm that ALL CHANNEL (even above 100) are now available on the 1.1 Firmware !!! TP-Link, thank you for the job even if you are bloddy slow !
- Copy Link
- Report Inappropriate Content
SamuelVenker wrote
Hello Everyone,
I confirm that ALL CHANNEL (even above 100) are now available on the 1.1 Firmware !!! TP-Link, thank you for the job even if you are bloddy slow !
Hi @SamuelVenker , are you EU, CA, or US model?
- Copy Link
- Report Inappropriate Content
@Cendana EU
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8536
Replies: 33
Voters 0
No one has voted for it yet.