MIB for SG2210P / Manage PoE over SNMP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MIB for SG2210P / Manage PoE over SNMP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MIB for SG2210P / Manage PoE over SNMP
MIB for SG2210P / Manage PoE over SNMP
2020-12-16 06:53:23
Model: SG2210P  
Hardware Version: V1
Firmware Version: 1.0.3

Hi there,

 

I got a TL SG2210P Smart Managed PoE Switch. I would like to shut off and on individiual ports to save power.

Unfortunately, the {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) powerEthernetMIB(105)} is not supported.

 

In the documentation the private-TP-Link MIB 11863 is mentioned and i can snmpwalk through the objects.

BUT: without the MIB File I cannot determine which OIDs are for what. All articles or manuals refer to the download portal, but I cannot find anything to download there.

 

iso.3.6.1.4.1.11863.1.1.26.1.1.1.1.0 = STRING: "8-Port Gigabit Smart PoE Switch with 2 SFP Slots"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.2.0 = STRING: "TL-SG2210P"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.3.0 = STRING: "SHENZHEN"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.4.0 = STRING: "www.tp-link.com"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.5.0 = STRING: "TL-SG2210P 1.0"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.6.0 = STRING: "1.0.3 Build 20160218 Rel.62575"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.7.0 = STRING: "18-A6-F7-DB-4C-6D"
iso.3.6.1.4.1.11863.1.1.26.1.1.1.8.0 = Timeticks: (869323103) 100 days, 14:47:11.03

...

...

iso.3.6.1.4.1.11863.1.1.26.13.1.2.1.1.11.7 = INTEGER: 1
iso.3.6.1.4.1.11863.1.1.26.13.1.2.1.1.11.8 = INTEGER: 0
End of MIB

 

Can you help me with that?

Thanks!

  0      
  0      
#1
Options
1 Reply
Re:MIB for SG2210P / Manage PoE over SNMP
2020-12-18 11:26:37

Dear @SirSydom,

 

I got a TL SG2210P Smart Managed PoE Switch. I would like to shut off and on individiual ports to save power.

Unfortunately, the {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) powerEthernetMIB(105)} is not supported. 

In the documentation the private-TP-Link MIB 11863 is mentioned and i can snmpwalk through the objects.

BUT: without the MIB File I cannot determine which OIDs are for what. All articles or manuals refer to the download portal, but I cannot find anything to download there.

 

If it helps, here is the MIB file provided from the TP-Link official website.

https://www.tp-link.com/en/support/download/tl-sg2210p/v1/#MIBs_Files

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options