Business Community > Switches > Multi Use of Switch
< Switches

Multi Use of Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Multi Use of Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multi Use of Switch
Multi Use of Switch
2020-11-24 19:50:52
Model: TL-SG1016DE  
Hardware Version: V3
Firmware Version: Latest

I have the setup as specified in the picture below:

 

As Soon as I connect Port 1 to the ISP I cannot manage the switch, the TP-link easy smart configuration tool does not even detect the witch.

 

I used VLAN ID 2 for port 1 till 8 to seperate it from vlan id =1 (which is default). The router is connected twice to the switch, first at port 2 for the WAN side and port 15 for the LAN traffic.

 

Is this normal behavior?

 

Johan

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Multi Use of Switch
2020-11-26 08:11:01 - last edited 2020-11-26 08:13:12

Dear @JohanV,

 

Please check the PVID settings. For your setup, you may set the PVID as below.

 

Port1 & Port2: PVID=2;

Port3 till Port8: PVID=4;

Other ports: PVID=1.

 

By the way, please check the IP settings of the switch, you may change the switch IP address to fit into your router's LAN.

 

If you still have trouble, please upload the VLAN config and IP settings of the switch for analysis. Thank you!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Multi Use of Switch
2020-11-26 08:58:14

Hi @Fae 

Here the config file of the switch (username and password = admin /admin2).

 

I have port 1 till 7 in VLAN 2. see also picture below.

 

 

Config has been attach as well with admin/admin2 as user/password.

File:
tp-link-config.cfgDownload
  0  
  0  
#3
Options
Re:Multi Use of Switch
2020-11-30 12:51:54

@JohanV 

The IP address of the switch is static set to the same subnet as my LAN (192.68.0.2/24).

 

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 908

Replies: 3

Related Articles
What mesh router to get with switch
410 0
 Eap225-wall for multi room use
387 0
SG1016DE Switch v4.2 hardware vs. v7.6 hardware difference
639 0
Use EAP615-Wall like a switch
639 0
multi sites
406 0
 TP-link does not discover switch
1213 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.